What is Toshiba washing machine EC5 error? The cause and how to fix it

The EC5 error of Toshiba washing machines is common in the Inverter line, making the machine unable to work and affecting your washing needs. Do not worry! Find out the cause and how to fix the EC5 error below!

What is Toshiba washing machine EC5 error?

Error EC5 Toshiba washing machine is an error related to the discharge motor, the sensor from below the motor or an error because the board reports the wrong value. The machine will report EC5 error when in the washing mode, but in the spin mode, the machine does not report the error.

In addition, when the machine encounters this error, it also makes the washing wheel not separate and not rotate , because the exhaust motor does not return, causing the two clutch wheels to not match. At the same time, the motor does not return and makes the machine in the washing mode when water is supplied, it will immediately discharge.

Causes and ways to fix error EC5 Toshiba washing machine

Due to clutch failure

Cause :

The clutch is designed by two gears. When in the washing mode, the two wheels work together to allow each middle plate to rotate. When in spin mode, the two wheels are separated, then the tray and the washing tub rotate together. The two gears do not match, causing the wheel to stall and jerk .

How to fix :

• Remove the washing plate and check.
• If the machine is damaged by the clutch, it is necessary to replace the genuine product, the correct model , the new machine will stop reporting the error.

Due to exhaust motor failure

Cause :

The exhaust motor has the role of both pulling the drain valve to let the water flow out, and at the same time making the clutch expand to help the wheel and the washing tub rotate together. If the two gears do not match, the exhaust motor will be damaged, causing the EC5 error.

How to fix :

• Run the machine in spin mode to check if the exhaust motor is damaged or not. If you see that the drain valve pulls out normally, the motor is still in good working order, otherwise the motor has failed and needs to be replaced.
• If the washing mode is selected and the machine gives an EC5 error, it means that the exhaust motor is damaged.

Due to magnetic sensor failure

The common error of magnetic sensor failure in the Toshiba Inverter washing machine line uses a 4-wire sensor, with a sensor board located deep inside the clutch.

Cause :

• The user uses the washing machine improperly.
• Long-term use causes the sensor to degrade and be easily damaged.

How to fix :

• You use the VOM scale in the multimeter to check the magnetic sensor located inside the motor. If the magnetic sensor and the permanent magnetor are damaged, you need to replace them.
• If you cannot find a suitable magnetic sensor, use a 220 VAC type relay with NC contacts instead. Use wire to solder 2 contacts with two black and red wires and attach them below the magnetic sensor.
• You use the wire to connect the two ends of the relay suction coil to the two pink and red discharger wires.

Because the board has a problem

After checking to make sure that parts such as the clutch, exhaust motor and magnetic sensor are working properly, the final cause of the Toshiba washing machine to report EC5 error is a damaged board.

Cause :

• Too forceful when pressing the control buttons.
• Putting too much detergent in the machine.
• Place the machine in a humid place.
• Place wet clothes on the control panel.
• Insects get into the motherboard because you do not clean and clean the machine regularly.

How to fix :

• Do not disassemble the board yourself without professional technician to avoid further damage. When the machine is damaged, please contact the repair center for timely repair.

Hope the above article will help you fix Toshiba washing machine EC5 error. If you have any questions, please leave a comment below for the fastest response!