What is Sharp washing machine E3 error and how to fix it in detail

Your Sharp washing machine cannot drain water out after washing? Most likely the washing machine has made an E3 error. Let’s take a look at the article about what Sharp washing machine E3 error is and how to fix the error in detail below!

What is Sharp washing machine E3 error?

When the Sharp washing machine finishes washing but does not spin or drains unevenly, it means that the washing machine has made error E3.

Causes and ways to fix Sharp washing machine E3 error

Drain hose is clogged

Cause: The drain pipe is blocked due to dirt, moss or foreign objects, or it can also be because the water pipe is bent or twisted.

How to fix:

• Check the water pipes and adjust them if they are bent or twisted.
• At the same time, please clean the 2 drainage pipes if they are blocked by dirt, moss or foreign objects.

Drain valve filter is dirty

Cause: The filter of the drain valve accumulates a lot of dirt or lint, soap adheres to the filter, preventing water from escaping.

How to fix: Use a pliers to remove the filter plate of the drain valve and clean them, then install the filter in the washing machine again.

The exhaust valve of the machine is broken

Cause: The drain valve of the washing machine is damaged, making it impossible for the water to drain out.

How to fix: You should contact the service center or a reputable washing machine repair center to replace the new drain valve.

The above article has shared with you information about what Sharp washing machine E3 error is and how to fix it in detail. Hope the above article can provide you with useful knowledge, if you have any questions, please leave a comment below for us to answer!