You are viewing the article What is Samsung washing machine LC error and how to fix it in detail at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
The drain pipe of your Samsung washing machine is clogged, dented, the display shows an LC error but you don’t know the cause and how to fix it? Then see what the washing machine LC error is and how to fix it in detail!
What is Samsung washing machine LC error?
The drain hose of the washing machine is not working properly due to improper installation or is blocked, dented, it means that your Samsung washing machine has encountered an LC error.
Causes and ways to fix Samsung washing machine LC error
The exhaust pipe is clogged
Reason:
- The drain pipe is blocked due to dirt, moss or foreign objects clinging to it or because it is dented or clamped inside.
How to fix:
- If the drain pipe is blocked, use tongs to pick up the dirt and then clean the pipe.
- And if the pipe is dented, clamped inside, please adjust them so that the wire is straight !
Improper installation or placing the hose too high above the discharge pump
Reason:
- You put the drain hose too high compared to the drain pump.
- The drain pipe is not installed according to the standards and position to be installed.
How to fix:
- Make sure that the end of the drain hose is placed low against the floor for the best drainage.
- Install the standard and correct water discharge pipe and then plug in the power to run the test again.
Some notes when Samsung washing machine reports an error
In the process of using the Samsung washing machine, you will inevitably have the machine suddenly report an error. Therefore, please follow these steps when you encounter an error:
Step 1: Turn off the washing machine and then unplug the power supply to the washing machine to ensure safety.
Step 2: You proceed to check the discharge pump, the water inlet and outlet to see if the filters are covered with dirt.
Step 3: Use a meter or plug another device into the outlet to see if the outlet has enough voltage for the machine to work.
Step 4: You can reset the device if necessary.
If you have performed the above steps and the Samsung washing machine still reports an error, please contact a reputable washing machine repair center or service center to check and fix the error most accurately!
Above is an article about what is Samsung washing machine 4C error and how to fix it in detail. If you still have any questions that need to be answered, please leave a comment below so that Tnhelearning.edu.vn can help you!
Thank you for reading this post What is Samsung washing machine LC error and how to fix it in detail at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: