You are viewing the article What is LG washing machine IE error and how to fix it simply at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Your LG washing machine cannot conduct water level selection to conduct washing modes? Chances are they’re making IE errors! Together with Tnhelearning.edu.vn, see the article about what is the LG washing machine IE error and how to fix it simply!
What is LG washing machine IE error?
When the washing machine works normally, after you press Power and select the washing mode on the control panel, after 1-2 minutes, the washing wheel will rotate to weigh and select the water level. However, if after a few minutes you do not see the washing machine being supplied with water and the screen displays an IE error, your washing machine has an IE error.
Causes of IE error LG washing machine
Due to no water supply
The washing machine must not have a water pipe or water tank to carry out the washing process.
Due to clogged water supply valve
Dirt, moss or foreign objects stuck in the water pipe block the water supply valve, making it impossible for water to be brought to the washing machine to perform washing modes.
Due to weak water
Weak water pressure leads to little or no water supplied to the washing machine for a long time leading to IE error.
Due to broken water supply valve
The water supply valve is broken, causing the washing machine to have no water, so the display shows an IE error.
Due to circuit board damage
The circuit board is damaged, so the water supply valve is not signaled to open the water into the washing machine to perform washing.
How to fix IE error LG washing machine
Step 1:
You should check the water supply directly to the washing machine to see if they are disconnected, blocked or not. At the same time, you should also check the water tank and water pipes to make sure they still have water and still have the ability to transfer water to the washing machine.
Step 2:
At this step, check the water supply valves in the tank and also the water supply valves to the washing machine to see if they are locked, damaged or blocked. If they are locked, open them to allow water to enter the washing machine, and if they are damaged, replace them immediately !
Step 3:
If you check and see that the filter is clogged, please remove the filter, clean them, and then reinstall it in the water supply valve!
Step 4:
In case the water supply valve of the washing machine has been damaged, please contact a reputable service center or repair center to be accurately checked whether they are really damaged and can be repaired or not. Cost savings.
Step 5:
And if the circuit board of the washing machine is damaged, please contact the warranty center or a reputable repair center at home for repair because if you do not have professional knowledge, it may cause more serious damage to the washing machine. there!
Above is an article about what is LG washing machine IE error and how to fix it in detail. If you still have any questions that need to be answered, please leave a comment below so that Tnhelearning.edu.vn can help you!
Thank you for reading this post What is LG washing machine IE error and how to fix it simply at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: