What is a washing machine gasket? How to clean the washing machine rubber gasket at home

The washer gasket is the connection between the drum and the washing machine door, if you do not clean it regularly, there will be phenomena such as plaque, moss, water leakage, and unpleasant odors. Let’s refer to Tnhelearning.edu.vn, what is a washing machine gasket? How to clean the washing machine rubber gasket at home!

See now the wipes are on SHOCKING discount

What is a washing machine gasket?

The washer gasket is made from rubber used to connect the drum and the washing machine cover to reduce vibrations when the washing machine is in operation and prevent water leakage to the outside.

This is an important part of the horizontal drum washing machine, without them the washing machine cannot work and we need to clean it regularly because the rubber gasket is in direct contact with water and detergent, the softener will be very easy to close. Moss, dirt, mold affect machine operation.

How to clean the washer gasket

When to clean the washer gasket

If you regularly clean the washer gasket, it will help the clothes clean optimally and increase the life of the machine. Use a clean towel to thoroughly clean this part once a week to help prevent bacteria and mold growth and protect the health of your family.

Clean the washer gasket when it is found that the washer gasket is dirty , the residue of water and washing powder reacts on the rubber gasket. You should wash your new washing machine with hot water 1-3 times per month , limiting the situation of dirty rubber gaskets.

Steps to take

When cleaning the washer gasket you need to take about 30-40 minutes, you can use baking soda or vinegar to achieve high efficiency. You need to follow the following procedure to help keep the washer gasket clean.

• Step 1 : Prepare vinegar, baking soda or javen water, clean cotton towel, warm water.

• Step 2 : Open the washing machine door, if you use vinegar, dip the towel directly into the vinegar and apply it around the surface of the washer gasket. And you use baking soda, you mix a little salt with a little water and apply the washing machine. Then you wait about 10-15 minutes for the effect.
• Step 3 : Use a cotton towel to wipe the surface of the washer gasket again, paying attention to clean the small slots.
• Step 4 : Finally, you use a clean towel, moistened with warm water, and wipe again to remove the baking or vinegar remaining on the surface.

Some notes when cleaning washer washers

To help keep the washing machine gasket clean, clothes fresh, and increase the operating life of the machine, when cleaning rubber gaskets, you need to pay attention to some of the following issues:

• After washing the clothes, use a towel soaked in a little warm water and wipe the rubber gasket.
• Clean the washer gasket with vinegar, baking soda 1 time in 1 week.
• Newly purchased washing machine, please wash it with hot water washing mode 1-3 times per month, regularly clean the rubber gasket.
• Clean the whole washing machine once every 3 months to limit mold.
• Check, clean and maintain the washing machine once every 6 months to help the machine operate stably.
• You should replace the new rubber gasket when experiencing water leakage outside, the gasket is torn, it is hard to use for a long time, causing vibration when operating.

►

Above is an article about what is a washing machine gasket? How to clean the washing machine rubber gasket at home. Any questions please leave a comment below!