What is a loudspeaker? Does replacing the speaker ribs affect the sound quality?

The speaker ribs help to reproduce clear sound, directly affecting the quality of the sound output. When used for a long time, the speaker ribs are degraded, making the sound not as resonant and good as the original. So what is speaker tendon? Does replacing the speaker tendon have any effect? Let’s find out more details with Tnhelearning.edu.vn in the following article!

What is a loudspeaker? Uses of speaker tendons

The speaker rib is one of the important parts of the speaker, belonging to the inner part of the speaker bass, located around the diaphragm at the outer edge . This part performs the function, a bridge between the bone and the diaphragm, they can move up and down according to the vibration of the speaker.

The softness and hardness of the bass will be determined by the speaker ribs. The speaker ribs are used to customize the soft and hard bass rhythm, by connecting the parts of the bone and the diaphragm. Speakers will give different sound quality depending on which speaker you use.

At the same time, if the speaker is equipped with quality speaker ribs, the speaker will emit bass with warmer and softer bass. During long-term use, the speaker ribs are easy to degrade, causing the sound to dry out and even burn the speaker. Therefore, you need to regularly maintain them.

Types of speakers on the market today

Fabric speaker rib

Speaker ribbed made of fabric is one of the high-quality, durable speaker ribs, due to its ability to withstand hot and humid climates, especially the weather conditions of Vietnam. At the same time, the fabric helps the speaker ribs to have a large amplitude of vibration without worrying about tearing.

Because of this advantage, fabric speaker ribs are applied in many speaker lines. However, this material is suitable for use in speakers with a large frequency range, helping to resonate far away, so its ability to show bass notes is not as good as the speaker ribs made of foam and rubber.

In addition, fabric speaker ribs are commonly used in stage speakers, hall sound systems, and events.

Speaker rib

Besides the fabric, the speaker ribs are also made of foam, which helps the bass notes to be deep and good, thereby giving better sound quality. As a result, this material is commonly used in home karaoke speakers.

However, the foam speaker ribs have less durability than the fabric speaker ribs. During long-term use, users will feel the sound quality is noticeably degraded.

Rubber speaker rib

Rubber speaker ribs are one of the most popular speakers on the market today. At the same time, rubber speaker ribs are also used in modern speaker lines, with the outstanding feature of deep and soft sound quality.

If the speaker ribs use good rubber material, the speaker ribs will have a long life and durability. The speakers equipped with speaker ribs made from rubber are reasonably priced, suitable for the economic conditions of many people. At the same time, when the speaker tendon is old or damaged, the user also replaces the speaker tendon simply and easily.

Does replacing the speaker tendon have any effect?

When you use the speaker for a long time, you will hear a dry and very hard sound, which is not the best listening to yellow music, lyrical music. This signals that your speaker ribs have been damaged and need to be replaced.

However, users are still wondering whether replacing the speaker ribs has any effect? Is the sound quality degraded? The answer to this question is NO .

Users who replace the new speaker ribs will help the sound quality come out better. If the speaker ribs have deteriorated, you will not replace the new speaker ribs and for a long time will affect the sound quality and other parts of the speaker. At the same time, when the user replaces the new speaker ribbed part, the sound will no longer be stiff, timid and does not affect the output sound quality of the speaker.

The cost of replacing new speaker ribs is not too expensive, only ranging from a few tens of thousands to a few hundred thousand. When choosing a new speaker, you should prioritize the type with good materials to help better sound quality.

How to replace the bass speaker ribs is very simple

If you are a technical person, knowledgeable about speakers, you can replace the speaker ribs yourself at home to save costs. To perform simple steps to replace the bass speaker, you can apply the following steps:

• Step 1: Remove the damaged tendon from the speaker, using a small amount of aromatic gasoline (butin) on the junction between the tendon and the bass membrane as well as the speaker bone. Then, you put it in a sealed bag for about 10 minutes , peel off the old tendon and use a cloth to clean it.
• Step 2: Next, you drill holes to catch the speaker ribs, you balance the speaker ribs and put the new speaker ribs on the speaker bass. Use a ballpoint pen to mark the position and proceed to chisel and screw into that position.
• Step 3: Pour glue into the bass speaker ribs, you can use the cylinder to pump the glue on the speaker rim and apply about 5mm by hand. At this step, the user needs to be careful so that the glue does not smear out, which is bad and affects the quality after being changed.
• Step 4: Then, you align and glue the bass speaker to the speaker bass so that it is in the correct position. If you see excess glue coming out, wipe it off. While gluing, use your hands to rub the glue to make the glue stick more tightly.
• Step 5: You apply glue to the outer rim of the speaker to stick the ribbed part of the speaker fixed. Paste the outer block and you’ve finished replacing the bass rib.

Some notes you need to know when replacing speaker tendons

In the process of replacing the speaker ribs, there may be some errors such as glue smearing or being burned. To ensure a successful home speaker replacement process, users should note a few issues as follows:

• Choose good quality speaker ribs , help ensure good sound quality and meet user needs.
• In the glue application step , you need to be detailed, meticulous and careful, do not pour too much to avoid the glue spilling out. If you spill too much, wipe it off with a towel. Pour slowly half a turn or 1/3 turn to prevent the scissors from drying out.
• Punch the screw position carefully and prepare to avoid being wrong when gluing in and removing it will be difficult.
• After completing step 4, press lightly on the center of the speaker with your hand to make the diaphragm move up and down if it emits a chirping sound, which means it has a fatal fault.
• During the process of replacing the speaker ribs, please put it on the foam pad , to help prevent scratches and breakage.
• Select a specialized glue to replace the speaker ribs.
• Regular maintenance and maintenance of the speaker helps to keep the speaker ribs in good working order.

Please refer to the speaker models being sold at Tnhelearning.edu.vn:

Hopefully the above article will help you understand more about what is a speaker tendon and choose to buy the right speaker. If you have any questions, please leave a comment below to be answered!