You are viewing the article Jaybird X3 Wireless Headphones User Manual at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
In this post, we will review the Jaybird X3 Wireless Headphones User Manual. Let’s check this manual of Jaybird X3 Headphones.
Jaybird X3 Wireless Headphones User Manual
SPECIFICATIONS
| Bluetooth Version | 4.1, Multipoint |
| Codec | AAC, SBC, Modified SBC |
| Profile | Handsfree, Headset, A2DP, AVCRP, SPP |
| Effective Range | 10 meters (30 feet) |
| Play Time | 8 Hours |
| Standby Time | 110 Hours |
| Power | Bluetooth headset: 5.0V , 0.5A |
| Charging Time | 2.5 Hours |
| Quick Charge | 20 Min = 1 Hour play time |
| Dimensions | 27 x 24 mm earbud size, 490 mm cord length |
| Weight | Approx 13 g |
*Play time and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the MySound app will reduce play time.
IN THE BOX
CHARGING/BATTERY STATUS
We recommend you charge your buds through any 5V 500mA USB power source. Wall/car adapters/chargers that supply more than 5.5 Volt will damage your Jaybird buds and should not be used.
A. Take your included charge clip and USB cable and plug it into a USB power source.
B. The red LED will show when charging, and will turn to green when fully charged.
- 2.5 hours charging gives
- 8 hours of playtime.
- 20 mins charging gives
- 1 hour of play time.
When not playing music, pressing Volume + or Volume – will announce the battery level.*
The LED will indicate a single green flash for more than 10% battery remaining and a single red flash when below 10%.
Your phone and the MySound App will also indicate battery status.
PAIRING
A. On your phone/music device, turn Bluetooth on and ensure it is actively searching for Bluetooth devices.
B. With your X3 turned off, press and hold the Power Button until you see the LED
flashing red/green. A voice prompt will say “SEARCHING FOR YOUR MUSIC DEVICE”.
C. Select “Jaybird X3” in the C list of discovered devices.
D. X3 voice prompt will say: “HEADPHONES CONNECTED”. You are now ready to listen to your music.
If the pairing is not successful, switch off your buds by pressing the Power Button until you hear “POWER OFF” and repeat the steps outlined above.
NOTE: When you turn your X3 buds on for the first time or after a reset, they will be in pairing mode.
FINDING YOUR PERFECT FIT
CHOOSING YOUR SETUP BASED ON USE
We recommend choosing a fit based on how you plan to use your Jaybird X3.
1. SET UP YOUR FINS
A. Lay your X3 in front of you with the inline remote on the left hand side. Swap the fins to the opposite side so the fin with the ‘L’ is now on the side with the inline remote.
B. Rotate the fins so they are pointing towards the cable, as shown.
C. Place your X3 over your ear with the inline remote on your left side.
2. FINDING THE RIGHT SIZED TIPS AND FINS
A. Starting with the medium-sized tips and fins attached, try placing A your buds firmly within your ear while in the over-ear position.
B. If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the Comply foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit.
C. Once you are happy with the fit, move onto step 3.
3. CORD CLIPS
A. Lay your X3 in front of you and fit A the cord clips as shown.
B. Find the right cord length to get a snug fit, with no excess slack, around the back of your head by pulling the top and bottom cord outwards.
C. Insert the last loop into the cord clip and pull firmly.
If you intend to use Jaybird X3 for casual use, we recommend the under-ear setup.
1. FINDING THE RIGHT SIZED TIPS AND FINS
A. With the medium-sized tips and fins attached, place your buds firmly within your ear while in the under-ear position. The inline remote should be on the right side.
B. If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the Comply foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit.
C. Once you are happy with the fit, you are good to go.
2. SHIRT CLIP
Use the included Shirt clip To secure your X3 buds to the back of your shirt.
Long side of the clip on the outside of the shirt.
DETAILED INSTRUCTIONS
BUTTON FUNCTIONALITY
| ON/OFF | To turn X3 on or off, press and hold the Power Button for about 4 seconds. A voice prompt will say “POWER ON” or “POWER OFF”. |
PLAYING MUSIC
- Play or pause, a song or video with a short press and release of the Power Button.
- To skip a song, press the Vol. + button for 1 second.
- To go backwards, press the Vol. – button for 1 second.
- To change the volume + or –, short press the Vol. + or Vol. – button
- To activate voice commands, (Siri or Google Now), press the Power Button for 1 second.
PHONE CALLS
- Accept a phone call, with a short press of the Power Button.
- To decline a phone call, press the Power Button for 1 second.
- To mute or unmute, a call press the Vol. – button for 1 second.
- To redial, a phone number you can double press the Power Button.*
- To switch a call from your phone speaker to your X3 buds short press the Vol. + button.
THE MYSOUND APP
- SOUND: Customize your sound settings. Changes are saved to your X3 buds.
- MUSIC: Indicates if music is playing on your device.
- DISCOVER: Discover presets from athletes and other users.
- SAVE: Save your new preset to your dashboard for easy access to all your favorite sound settings.
- HISTORY: Track through a history of your changes.
- DEVICE: See your connected device and battery status.
MULTIPOINT – CONNECTION TO MULTIPLE DEVICES
Multipoint allows you to be connected to two devices simultaneously. You can for instance be connected to your laptop and your mobile phone. While listening to music on your laptop you will be able to accept an incoming call on your phone.
- Ensure your X3 buds are paired and connected to both devices.
- Make sure that only the two devices you want to connect to are turned on and in proximity.
Your X3 can remember up to eight paired Bluetooth devices and can be actively connected two devices at a time.
SHARE ME
The ShareMe feature allows you to share the music you are listening to with another pair of X3 buds.
A. Power on both pairs of X3 buds.
B. Only connect one device to your music device. Ensure the second device is not connected to any Bluetooth device.
C. Press and hold ‘VOL +’ on the connected buds, while you press and hold the ‘VOL -’ on the second buds until the LEDs on both buds are flashing red/green.
D. Both buds will be connected when the LEDs stop flashing and you will hear ‘Headphones Connected’. Play some music and enjoy the shared experience.
SMARTWATCHES
With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair X3 to your smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.
- Apple WatchOS
- Samsung Tizen
- Android Wear
TROUBLESHOOTING
If your buds are not responding, connect the charge clip and USB cable to a power source. This will turn your buds off and perform a soft reset.
If this does not resolve your problem we recommend to reset your buds to their original factory Settings.
- Put your buds in pairing mode. Turn the buds off, then press and hold the Power Button for more than 4 sec until you see alternating red/green LED.
- While the LED is flashing red / green double press the Power Button.
- The LED will turn orange and your buds will turn off.
NOTE: Once your buds have been reset you will have to pair it again to your devices. Select “FORGET” or “REMOVE” Jaybird X3 from your device’s Bluetooth menu. Follow the pairing instructions on page 5-6 to repair your devices.
LISTEN RESPONSIBLY
Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability.
Do not use around road traffic.
CARE AND MAINTENANCE
Clean eartips regularly of dirt and wax buildup. To clean, remove eartips from earbuds, then gently wipe away dust and oil with a dry cloth, and/or use warm water and mild soap to remove buildup. Rinse and completely dry before reattaching.
Before charging, ensure earbuds are completely dry of sweat and water.
Source
- jaybirdsport.com
- Download User Manual – Download
Read More
Thank you for reading this post Jaybird X3 Wireless Headphones User Manual at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search:
