Instructions on how to make 3D jelly with a unique and beautiful needle

Prepare
30 Minutes Processing
240 Minutes For
2 – 3 people

Jellyfish is a familiar dish of many Vietnamese families and especially children. But when it comes to 3D jelly, many people often think of buying it from the store without thinking about making it. Because thinking to make 3D jelly is very demanding and not everyone can do it, so this article will show you how to make 3D jelly at home with only simple ingredients and tools. everyone will have.

Ingredients for making 3D jelly jelly

• 20g flexible jelly powder
• 300g sugar (can increase or decrease depending on taste)
• 2.6 liters of water
• 3 tablespoons condensed milk
• Food coloring, syrup or color from fruit juice
• 100ml coconut milk
• Tools: Needle, straw, spoon, plastic bowl, filter cloth…

How to make 3D jelly

Making a jelly background:

For 3D jelly, the clear background is an important element when decorating flowers for jelly so follow each step and do it carefully.

Step 1Heat the jelly

Mix 1 pack of 10gr jelly powder with 150g sugar.

Put 1.2 liters of water into the pot to boil , when the water starts to heat up, add the jelly powder and sugar mixture and stir with your hands for 5 to 7 minutes and keep the pot temperature not too boiling.

Good tip
You should only stir in one direction and limit the reverse because it will easily make the jelly foam and the background is no longer transparent, which will greatly affect the process of creating decorative flowers for jelly so you should be careful. dental!

Swing the jelly and stir well on the stove

Step 2Filter out the jelly foam

Filter out the foam in the solution during the heating process with a layer of filter cloth to ensure that the jelly is clear of air bubbles.

Filter the jelly after boiling with a thin cloth

Step 3Freeze the jelly

Gently pour into a jelly container such as a plastic bowl, glass cup, … and note that only about 2/3 of the container is poured to facilitate the flower making process. Then put in the refrigerator for about 3 hours to 4 hours until the jelly is frozen.

The jelly background solidifies after 3-4 hours

Create flowers in jelly

Step 4Cook the flower jelly

Mix the following ingredients: 1 pack of 10gr jelly powder + 150gr sugar + 4 tablespoons condensed milk + 100ml coconut milk + 1.4 liters of water. Then heat on the stove and stir by hand for 5 minutes to 7 minutes.

Then divide the jelly made above into small cups and color with syrup, food coloring or vegetable juices as you like.

Stir the jelly with your hands while cooking

Step 5Prepare syringes and needles

Use scissors to cut the straw as shown below to facilitate the creation of flowers and thoroughly wash the needles then drain

Prepare syringes and needles

Step 6Create pistil

Take out the frozen base, then cut a shallow circle in the center of the jelly base, then pour in a portion of the cooked jelly , use the straw prepared above to pierce to create the pistil.

Create pistil

Step 7Create Petals

For petals, you continue to use a straw to alternately pierce the stigma and use a needle to inject the jelly in a circle around the pistil and repeat 5 to 6 times until the base of the jelly is finished. Finally , add a layer of jelly on the surface and you’re done.

Just stab and pump jelly to create petals

Add a layer of jelly background

Good tip
You should use a spoon to remove the excess jelly during the pumping process so that the colors are not mixed up and the flowers are not beautiful.

Finished product

3D jelly jelly is beautiful and delicious

The above article has detailed instructions on how to make 3D jelly at home, both delicious and beautiful, hope that after this article you will successfully make this 3D jelly at home!

Tnhelearning.edu.vn