How to Use a Hairpin to Open a Lock

You are viewing the article How to Use a Hairpin to Open a Lock  at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.

Lock picking is a skill that has been practiced for centuries, and it continues to intrigue curious minds and locksmith enthusiasts. The art of opening a lock without a key requires patience, precision, and, at times, unconventional tools. One such tool that can prove surprisingly effective is a hairpin. Yes, the same accessory usually used to hold up hair can also be utilized to manipulate locks. In this guide, we will explore the techniques and steps required to use a hairpin to open a lock. Whether you find yourself in a lockout situation or simply wish to expand your knowledge on lock-picking methods, this tutorial will provide you with the know-how to successfully use a hairpin as a lock-picking tool.

No one wants to be locked out. While a locksmith can solve this easily, their services are expensive and time consuming. If you want to choose another solution, just use 2 hairpins to be able to enter the house.

Table of Contents

Steps

Prepare the “tool kit”

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/1/12/2909782-1_v1%402x.jpg/v4-728px-2909782-1_v1%402x.jpg”,”bigUrl”:” https://www.wikihow.com/images/thumb/1/12/2909782-1_v1%402x.jpg/v4-728px-2909782-1_v1%402x.jpg”,”smallWidth”:460,”smallHeight”:259 ,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}

Straighten a hairpin. Break the hairpin upside down so you have a long metal stick. This will be the padlock, used to push the pins up.

• Strip off the plastic wrap at the ends as it will get in the way of you when unlocking. You can use stripping teeth, or use scissors to cut the power cord if you have one. ^[1]

Use the padlock to break the tip of the pin into a poke. Insert the pin into the keyway about 1 centimeter. The flat side of the pin will be facing up. Push the rest of the pin to the left, then the tip of the pin will be slightly bent. The tip of the pin only needs to be bent a few millimeters.

• You will push the pin to the left about 5-7cm to achieve the right curvature.

Break one end of the poke into a handle. Take one end of the stick and bend it in half backwards, forming a loop. You just need to simply bend it to make it easier to handle and rotate the poke.

Make a lever by breaking the entire pin into a right angle. Using pliers is easiest, but you can use your fingers and give it a little more force. The lever acts as a key — used to rotate the locking shaft when you have pushed the pins up (which holds the lock shaft in place). You just need to break the pin in half (from the end of the plastic wrap) to form a right angle with the rest of the pin.

Visualize the inside of the lock to understand how to poke. A normal lock will have two parts: the lock shaft and the latch . The key shaft is where you insert the key. Pins are cylindrical metal rods inserted into the lock shaft, holding the lock shaft in place until the key (or poke) pushes them up to release the lock shaft. The latches are split in half, and when the split mark aligns with the lock shaft, you can unlock the lock. Your job is to use your hands to push each pin into the correct position, slowly rotating the lock shaft so that the pins cannot fall back down. After you have pushed all the latches, the lock shaft will rotate freely and open the door.

• The key is basically a poke with an intricate design. The grooves are turned so that when you insert the key into the lock shaft, all the latches are aligned and you can turn the door handle. ^[2]

READ More:   How to Unlock Characters and Trophy in Mario Kart

Poke the padlock

Tuck the lever into the back half of the lock. Tuck the curved end into the back half of the lock, keeping the lever as low as possible while still trying to squeeze it all the way into the lock shaft.

Turn the lever slightly in the direction you would normally use to unlock. Using the lever as the key, turn the lock as if you were going to open the door. You won’t be able to rotate much but need to create this pressure. You need to maintain pressure on the lock throughout the opening, but don’t twist it too hard. You only need to apply enough force to turn the lever slightly, but don’t put pressure on the lock. Remember, you still need to keep the pins in the locking shaft loose enough to be able to push it up.

• If you can’t remember which way to turn the lock, try turning it both ways. The wrong direction of rotation will make a clicking sound, and you will feel a slight grinding.

Insert the poke with the curved end facing up, and fumble for the pin. Use the poke to move up and down to find the pin. They will be in the top half of the keyway. Push a few pins up, you will feel them move and fall. You have to shake the poke up and down slightly to push all the pins up, but some pins may not move, but you don’t need to worry. For now, count the number of pegs and notice which moves freely and which is stuck.

• The curved end of the poke should point up. You will use the curved end to push each pin up.
• If the latch won’t budge, you’ll have to turn the lever harder. Relax and try again. ^[3]

READ More:   How to Mix Dark Blue

Find the first “blocking” pin and push it up until you hear a click. While checking the pins, look for any bars that won’t move. Keeping steady pressure on the lever, gently push it up until a clear “CLICK” is heard. This sound indicates that you have matched the bifurcation on the pin with the locking shaft, and now the pin is no longer blocking the locking shaft.

• You’ll see the lever rotate a little more once it’s pushed into place. That’s because there is a pin that no longer obstructs the locking shaft.

Find and repeat this process for the remaining pegs. After you push one of the pins up, the previous free pins will block. This is actually a good thing because it helps you figure out which pin to push next. Repeat this process until the lever can fully rotate the lock shaft and the door opens:

• Find the blocking pin, which cannot move much.
• Continuously turn the lever to press into the lock as if you were unlocking it.
• Gently push the latch up until you hear a click in the lock.
• Move to the next pin. ^[4]

Adjust the pressure on the lever if you get stuck. This is the most common difficulty that unlockers encounter, because primarily you have to learn how to feel. If you turn the lever too hard, the pins will get stuck and you won’t be able to push them out of the lock shaft. If you turn the lever too lightly or accidentally loosen your grip, the pins will slide back down, and you will have to start over. My advice is to start with a little bit of pressure, then relax until you can push the pins up. This will prevent the pin from falling back and allow you to find the right pressure. ^[5]

Advice

• Remove the plastic wrap of the hairpin as it can get stuck in the lock.
• Don’t be in a hurry to poke the lock. Moving slowly and steadily is the best way to not make mistakes that will force you to start over.
• Hairpins work best on padlocks and common household locks.

READ More:   How to get rid of worms

Warning

• Do not experiment to see if this method of unlocking works because you may damage the lock and have to replace it with a new one.
• Never poke a lock that is not yours or is not authorized by the owner. This article is for those who lock the door but forget to bring the key, or lose the key. Unless that’s the only way you can get in, though.

Things you need

• 2 hairpins
• A padlock

No one wants to be locked out. While a locksmith can solve this easily, their services are expensive and time consuming. If you want to choose another solution, just use 2 hairpins to be able to enter the house.

In conclusion, using a hairpin to open a lock can be an effective method when you find yourself locked out of a room or forgot your keys. However, it must be noted that this technique should only be used in emergency situations and a person should never attempt to pick a lock that they do not have permission to access. Moreover, it is essential to understand the legal implications of using such methods and the potential damage it can cause to the lock. Additionally, it is crucial to remember that lock picking requires practice and patience, and may not always be successful. Therefore, it is always recommended to contact a professional locksmith for assistance in order to ensure the safety and security of the property.

Thank you for reading this post How to Use a Hairpin to Open a Lock at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.

Related Search:

1. “Steps to open a lock with a hairpin”
2. “Hairpin lock picking techniques”
3. “Using a hairpin as a lockpick”
4. “Beginner’s guide to hairpin lock picking”
5. “Hairpin lockpicking tips and tricks”
6. “Can a hairpin really open a lock?”
7. “Hairpin lock picking without damaging the lock”
8. “Hairpin lock picking tools and accessories”
9. “Common mistakes to avoid when using a hairpin to open a lock”
10. “Is hairpin lock picking legal?”