You are viewing the article How to Take Apart Xbox One Controller at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Xbox One is a famous video game console used by the gaming society. This console is not only for playing games but also for streaming movies and TV shows. Every console has a control tool that helps control the motions while playing games. Sometimes while playing games, you may encounter some difficulty with a joystick on your Xbox One Controller. So due to the test, users think about How to Take Apart Xbox One Controller to solve the problem so that they can play games without any disturbance.
Method-1
Steps to take apart Xbox One Controller:
First, you must arrange for the necessary tools like the T6T8T10 Screwdriver kit and Xbox One Controller. Having a tray while working is good as you can avoid screws or other smaller tools dropping on the floor, which sometimes can miss. Follow the below-given steps to take apart the Xbox One Controller.
1- Remove the orange pry tool from the tool kit, which helps to discard the handle covers of the controller.
2- You should slide the pry tool connecting the plastic seam on the grips.
3- Hold the grip properly away from the central controller body. You can get only sticky holding beneath the plastic, giving a light force on it without destroying the internal parts.
4- Repeat the same thing for both grips.
5- Now, you can remove the screws to take apart your Xbox Controller. Be cautious while removing it without destroying the wires connected between the battery and the circuit.
6- With the help of a T8 screwdriver, take out the five security screws. Also, check whether you have an unscrewed screw beyond the sticker in the battery housing.
Also, Read Super Bowl on Xbox
Method-2
Steps to Take Apart Xbox One Controller:
Arrange the tools to take apart Xbox One Controllers such as Soldering Iron, fix it Opening tools, T6 Torx Screwdriver, T8Torx Screwdriver, and the controller. Follow the below-given steps to take apart the Xbox One Controller.
1- Using a pry tool, take out the side panels.
2- Unscrew the 5 Torx Security Bit ( TR8 Screws)
3- Removing out the back panel, pry the panel following the 3.5 mm port.
4- Take out the ribbon carefully.
5- Screws on the controller motherboard by discarding the 2 Torx (T6) screws.
6- Separate the wires from the motherboard.
7- Discard the motherboard.
8- Take out the home button cover.
9- Now, take out the controller daughterboard by removing the 6 Torx (T6) screws
Method-3
Steps to take apart Xbox One Controller Without Torx:
Removing your Xbox One Controller using a Torx screwdriver is a fantastic choice, but if you don’t have that when you need it, you are supposed to follow the other alternative ways, which are given in the following steps.
1- First, arrange for the necessary tools like a 2mm turnscrew with an electronics level with seven screws and one hidden screw.
2- Now, insert the screwdriver to take out the screw easily. Remove all the screws. Only then can you take apart the Xbox One Controller?
For more details, HBO Max on Xbox One
How to Set up the Xbox One Wireless Controller Button Replacement?
If you need to replace the Xbox One Wireless controller button. Then you have to follow the upcoming topics.
Step 1:
- First of all, you have to take out the battery pack cover.
- And then remove the batteries from it.
Step 2:
- next, you have to remove the side handle of the controller and wedge a spudger into the seam of the front and handle plates.
- try to move the front place and the Spudger back and forth.
Step 3:
- By using a Screwdriver and stick a hole in the center of the label directly.
- First, you have to remove the Five 10mm screws located on the back of the Controller by using the T8 security Torx Screwdriver.
Step 4:
- Once all the Screws are removed from the controller then you have to remove the backplate of the Xbox one Controller.
Step 5:
- At the same time, you have to remove the Faceplate also.
Step 6:
- You have to let the rumble motor out of the socket.
- And hold the red and black wire down on the motherboard.
- After that, you have to fix the gravy wires and the black wire together at the top of the motherboard.
- Now you have to remove the rumble motor and set them aside.
Step 7:
- At this stage, you have to remove the two 7mm and T6 screws and placed front of the Rumble motor socket.
Top Motherboard:
Step 8:
- Hold the motherboard in the middle and take it upward slowly and push the motherboard forward and backward.
- By using the same force lift the motherboard from the controller.
Bottom Motherboard:
Step 9:
- From the bottom of the motherboard remove all the Six T6 Torx Screws and packed at the bottom of the Motherboard.
Step 10:
- From that, You have to remove the bumpers by prying off the pegs and using a Spudger for more security.
- Then you have to place it front and back of the controller.
Step 11:
- Take the piece around the home button of the pegs.
- And you can use the other side for a Spudger on the pins.
- Taking off the pieces needed a lot of force.
Steps 12:
- Take off the bottom motherboard.
Step 13:
- From the Button take off the Rubber backing.
Step 14:
- Fix the button facing down and push them off their housing and remove it.
To get additional info, IPTV on Xbox One
Conclusion:
Taking Xbox One Controller apart is lenient, but what matters more is you have to be cautious while doing so. By following the above-given methods, you can also clean the interior parts, clear the issues of your joystick, solve controller drift difficulty, and paint. We hope this article will help you.
Thank you for reading this post How to Take Apart Xbox One Controller at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: