You are viewing the article How to Shower While in a Cast at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Luba Lee, FNP-BC, MS. Luba Lee is a licensed family physician practicing in Tennessee. She received her MSN from the University of Tennessee in 2006.
There are 8 references cited in this article that you can see at the bottom of the page.
This post has been viewed 10,227 times.
When you break your leg or arm, you may be confused about how to clean your body. Bathing can be difficult when you have a cast, but the problem is not without solutions. In the event of a broken limb, you will have to keep the cast dry while showering. Be careful when getting in and out of the tub. If unfortunately the powder gets wet, you should call your doctor for instructions on how to handle it.
Steps
Keep the cast dry
- Powder wet wraps are usually long tubes made of waterproof material. You will wrap this product over the cast. This product is available in different sizes for different types of casts. The main advantage of these products is that they are much stronger than other items, so they are also difficult to tear.
- Some powder wetsuits come with a pump that sucks the air out, forming a tight seal around the powder for added protection.
- Newspaper bags, bread bags or small garbage bags also work. You will wrap these bags over the cast and secure the top with elastic bands or tape. Elastic bands are usually gentler on the skin, plus you can also reuse the bag after showering.
- Remember to check the plastic bag to make sure there are no holes before wrapping the dough.
- Remember that cling film may be less effective than other methods. Although cling film is relatively cheap, if you don’t wrap it tightly enough, the dough can come loose.
Find alternative ways
- Try bathing in the tub instead of the shower. If you break your arm, it’s easier to stick your arm out to avoid the water in the tub. Simply rest your hands on the edge of the tub while bathing the rest of your body.
- If you just enjoy showering, try to keep your arms out to avoid running water. You may have to leave the broken limb outside of the shower during the shower.
- However, even if you have kept the cast away from water, you should not shower without wrapping it. The dough can be damaged by even a small amount of water. [6] X Research Sources
- If you have a young child in a cast, you can wipe the child until they get used to the cast.
- If you are an adult, you can wipe yourself near the sink. If anyone in your family can help, try asking them to help you clean.
- There are many types of waterproof cast materials. You should ask your doctor about which material is right for you. Some types may be more effective than others, so your doctor can explain to you which is beneficial for you.
- Remember that waterproof powder is not 100% waterproof. While this powder can withstand water better than most, you should still be careful when bathing, showering, or swimming. Try not to let the dough get wet.
- Waterproof powders may not be suitable for fractures that require movement to heal.
Shower with foot cast
- Make sure the seat is stable. You could be further injured if the chair slips in the bathroom.
- You may need a non-slip mat in the bathroom.
- Have someone without a broken leg test the firmness of the chair before you step in the shower.
- You can use anything to hold onto. Try propping up the shower wall or shower bar if it feels sturdy. Don’t forget that the shower rod isn’t actually drilled into the wall, so you’ll need to test it out before grabbing it.
- Gently sit down in a chair and lift your feet away from the running water. Turn to face the shower handle.
- If you don’t have a handheld showerhead, you can try showering with a stationary shower and a wet towel. However, you need to be extra careful so that water does not splash into the cast. Always wrap the powder before bathing.
- If you have a wheelchair, you can gently sit back in your wheelchair after getting out of the shower.
Handling when the dough is wet
- Use a hair dryer to dry the powder. You should always use cool mode. Hot or warm temperatures can cause burns.
- You can also try using a vacuum cleaner if you don’t have a hair dryer.
Advice
- Attach the shower head to the water pipe if you don’t already have one. Showers will make it easier to shower with casts, especially leg casts.
This article was co-written by Luba Lee, FNP-BC, MS. Luba Lee is a licensed family physician practicing in Tennessee. She received her MSN from the University of Tennessee in 2006.
There are 8 references cited in this article that you can see at the bottom of the page.
This post has been viewed 10,227 times.
When you break your leg or arm, you may be confused about how to clean your body. Bathing can be difficult when you have a cast, but the problem is not without solutions. In the event of a broken limb, you will have to keep the cast dry while showering. Be careful when getting in and out of the tub. If unfortunately the powder gets wet, you should call your doctor for instructions on how to handle it.
Thank you for reading this post How to Shower While in a Cast at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: