You are viewing the article How to Remove Scratches on Stainless Steel Surface at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Filip Boksa. Filip Boksa is the CEO and founder of King of Maids, a US-based home cleaning services company dedicated to helping clients clean and organize.
There are 8 references cited in this article that you can see at the bottom of the page.
This article has been viewed 7,179 times.
Stainless steel is a great material for kitchenware, sinks, sanitary ware and other items in the home or workplace. This material is durable, has a modern and beautiful appearance, is resistant to stains and other damage. However, stainless steel is not resistant to all impacts and can still be scratched. With the exception of chips, dents, and deep cuts that require professional replacement or repair, you should be able to deal with scratches on your own.
Steps
Polishes light scratches
- The steel surface can be scratched more severely if you rub against the steel grain. This explains why it is important to determine the grain direction before starting processing.
- Steel veins usually run from side to side (horizontally) or top to bottom (vertical).
- Bar Keeper’s Friend Multi-Purpose Cleaning Powder
- Perfect-It . Polishing Compound
- Revere copper and stainless steel cleaning products
- White toothpaste
- You need to mix so that the mixture has a consistency like toothpaste. [2] X Research Source
- Continue scrubbing until the scratch is gone, adding more compound if needed. [3] X Research Sources
- Repeat the polishing process if the scratch condition improves but the blur is still visible.
- If the scratch is still faint, you may need to take a few more aggressive steps, such as sanding the entire steel surface.
Sanding deeper scratches
- Coarse (brown) and fine (gray) scouring pads [5] X Research Source
- 400- and 600-grit . sandpaper
- Scratch Removal Kit [6] X Research Source
- Water or compounds have a lubricating effect and allow the sanding product to glide over metal surfaces.
- It is important to scrub in one direction, as back-and-forth rubbing can cause small scratches on the steel surface.
- To apply even pressure, you can wrap a scouring pad or sandpaper around a piece of wood before scrubbing.
- To find the steel grain, look to see if the steel surface runs horizontally or vertically. That is the steel vein.
- Continue scrubbing until the scratch is smoothed and almost gone.
- Depending on the surface area of the steel, sanding may take 15 minutes or more.
- Continue scrubbing until the scratch disappears.
Filip Boksa
Cleaning Service Specialist, King of Maids
Filip Boksa is the CEO and founder of King of Maids, a US-based home cleaning services company dedicated to helping clients clean and organize.
Cleaning Service Specialist, King of Maids
You can find scratch removal kits at most hardware stores. The stainless steel kit is the best tool for removing scratches. Simply mix 2 tablespoons of the product with 4-5 drops of water, then rub it over the scratch with a damp microfiber cloth.
Steel cleaning and polishing
- Even when cleaning, you need to scrub and polish in the direction of the steel grain. You should carefully observe the steel surface to determine the direction of the steel grain and wipe in that direction.
- Vinegar will clean the steel surface and remove any traces of other cleaning agents and compounds.
- Do not use bleach, oven cleaning solutions, abrasive cleaners or abrasive scouring pads when cleaning stainless steel. [13] X Research Source
- Add more oil if necessary. Continue scrubbing until the entire steel surface is shiny.
Things you need
- Non-abrasive compound
- Water
- Microfiber fabric
- Sandpaper
- Abrasive scouring pad
- Aerosol
- Vinegar
- Oil
This article was co-written by Filip Boksa. Filip Boksa is the CEO and founder of King of Maids, a US-based home cleaning services company dedicated to helping clients clean and organize.
There are 8 references cited in this article that you can see at the bottom of the page.
This article has been viewed 7,179 times.
Stainless steel is a great material for kitchenware, sinks, sanitary ware and other items in the home or workplace. This material is durable, has a modern and beautiful appearance, is resistant to stains and other damage. However, stainless steel is not resistant to all impacts and can still be scratched. With the exception of chips, dents, and deep cuts that require professional replacement or repair, you should be able to deal with scratches on your own.
Thank you for reading this post How to Remove Scratches on Stainless Steel Surface at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: