How to make a very simple and eye-catching watch box at home

For watch enthusiasts and lovers, the watch box is very important, creating class for their watch. Let’s try making a very simple and eye-catching watch box with Tnhelearning.edu.vn in the following ways!

How to make a wooden watch box

Ingredients to be prepared

– Wooden boards with a thickness of 1cm.

– Pre-cut glass or mica plastic sheet according to the size you intend to make the watch box.

Tools: Wood saw, wooden tea machine, pen, ruler…

Steps to take

Step 1 : Cut the wood into small pieces according to the predetermined size to make the watch compartment . Measure and cut small wooden slats to make compartments. Then fix the wooden pieces as shown.

Depending on the size of the copper box, the number of compartments is more or less different, but you must ensure that the distance between the compartments is equal , so that you can get a beautiful watch box.

Step 2 : Measure and cut wood to make a watch box so that the wall of the box is higher than the wall of the tray. It’s a good idea to sand the sides of the wood before you glue them together.

Step 3 : Install the glass for the watch box and attach the wooden pieces of the box together. Use wood glue and wood braces to fix the wooden slats firmly.

Step 4 : Use a chainsaw to cut around the side of the box containing the glass to make the lid of the box.

Note: the lid of the box should not be too thick nor should it be too thin. You should test the compartment to balance the distance and then cut the lid off.

Step 5 : Use a thin wooden board to close the bottom of the box. Then put the hinge and screw to fix the lid of the box.

In the end, you will get the complete watch box.

How to make a paper watch box

Ingredients to be prepared

– Hardcover or paper

– Fabric has color and pattern as you like

Tools: Pen, ruler, scissors, glue, double-sided tape, …

Steps to take

Step 1 : You cut the cardboard and fabric for the bottom of the box to the size of 29.5cm X 9.5cm , then glue them together.

Step 2 : Continue to cut the cover and fabric to make the sides of the box according to the size of 10.5cm X 5cm and then glue them.

Next, you glue these two pieces of cardboard to the bottom just made before.

Step 3 : Make the body of the box according to the size of 30cm X 5cm . Glue the fabric and cardboard cut to size together. Stick them to the bottom and sides of the previously finished box.

Note : Use double-sided tape to fix the box more firmly.

Step 4 : Cut the cover of the cardboard box to the size of 30.2cm X 10.3cm . You need to glue this cardboard box with another piece of cardboard according to the size of 30.2cm X 5.15cm . Next, you glue the lid of the box with the corresponding fabric . Then fix them to the previous box body.

Step 5 : Cover the outer surface of the box by gluing the fabric (glued with soft newspaper) to the entire outer surface of the box.

Step 6 : Make the dividers in the box according to the size of 9.8cm X 4.5cm . You cut the fabric and cardboard to size and glue them together as we did earlier.

Then, secure them to the inside of the box with glue.

So with just simple items, you have a beautiful watch box.

Above is information on how to make a very simple and eye-catching watch box that Tnhelearning.edu.vn shares with you. If you have any questions, please leave a comment below the article.