You are viewing the article How to Install a DVD Player at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 38 people, some of whom are anonymous, have edited and improved the article over time.
There are 7 references cited in this article that you can see at the bottom of the page.
This article has been viewed 11,747 times.
DVD is now very popular in the entertainment world and the price of DVD players is not too expensive. Installing the DVD player with the TV will help you enjoy both the sound and the picture in a wonderful way. Most modern TVs and DVD players are easy to install.
Steps
Install DVD player
- HDMI: This is the most modern connection type, the HDMI port looks like a USB port but is longer and thinner. The HDMI connection provides the best quality and you only need to use one connection wire to transmit both audio and video signals.
- A/V cable (3 ends): Short for Audio/Video cable, this is the most common DVD connection port. There are 3 red, yellow, and white headers that are compatible with inputs on TVs and DVD players.
- Component Cable: Better quality than A/V but worse than HDMI, 5-pin hardware cable with color compatible with input ports on TVs and DVD players.
- If possible, use an HDMI cable because it is easy to set up and gives the best picture quality.
- Do not place other electronic devices on top of DVD players or TVs as they will quickly increase in temperature and damage other devices. [1] X Research Source
- Some projectors use “DVI input ports” instead of the 3 connection types mentioned above. If so then follow the “Connect using HDMI cable” procedure replacing the DVI cable with the HDMI port. [3] X Research Sources
Connect by HDMI Cable
- This is the highest quality connection for both audio and video, usually only modern DVD players have HDMI ports.
- If the input ports are numbered, for example “HDMI 1”, you will need to remember this number so that the following step can be used to set up on the TV.
- There are many HDMI cables on the market, but the difference in quality is not too obvious. [4] X Research Sources
- If the port is not named or you don’t remember which port you use, turn on the DVD player and try each port until picture and sound appear.
Connect by A/V Cable (3 ends)
- These connectors are usually grouped and marked with a border.
- Sets of input ports are usually grouped and marked with a border.
- The Red and White (Audio) ports can be located separately from the Yellow (Picture) ports. On the port will specify which port corresponds to which Input.
- The visual Yellow port can be located separately from the Audio Red and Yellow port.
- If the port is not named or you don’t remember which port you use, turn on the DVD player and try each port until picture and sound appear.
- If the picture is still not visible, make sure the Yellow plug is properly connected to the corresponding color input port on the TV and the output port on the DVD player.
- If no sound is heard, make sure the Red and White plugs are properly connected to the corresponding colored input ports on the TV and the output on the DVD player.
Component Cable (5 ends)
- Component cable has 2 red ends, so it’s easy to confuse. To distinguish these two ends, you just need to lay the cable down on the plane and the ends will be arranged in the order of colors Green, Blue, Red (image), White, Red (audio).
- Some component cables have only Green, Blue, and Red video heads. You need to buy an audio cable with separate Red and White ends to hear the sound from the DVD, similar to the A/V cable mentioned above.
- If the port is not named or you don’t remember which port you use, turn on the DVD player and try each port until picture and sound appear.
- If the image is not visible, check that the Green, Blue and Red plugs are properly inserted into the corresponding colored input ports on the TV and the output on the DVD player.
- If there is no sound, check that the Red and White plugs are plugged into the correct colored input ports on the TV and the output on the DVD.
- Double check the 2 red plugs to see if they are plugged into the correct port or not. If plugged in the wrong place, both audio and video signals will not be received.
Troubleshoot
- Some TVs will name the Input port according to the connection type, for example “HDMI”, “AV” and “COMPONENT”. Review Step 1 to determine the type of connection you intend to use.
- Note: There are many companies that advertise expensive cables. However, you won’t notice a huge signal difference when using a high-end cable. Especially with HDMI cable, 100,000VND cable also gives the same picture and sound quality as over 1 million VND cable. [7] X Research Sources
Advice
- DVD players often come with a “Quick Start” book, which provides basic instructions for setting up and using the device.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 38 people, some of whom are anonymous, have edited and improved the article over time.
There are 7 references cited in this article that you can see at the bottom of the page.
This article has been viewed 11,747 times.
DVD is now very popular in the entertainment world and the price of DVD players is not too expensive. Installing the DVD player with the TV will help you enjoy both the sound and the picture in a wonderful way. Most modern TVs and DVD players are easy to install.
Thank you for reading this post How to Install a DVD Player at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: