You are viewing the article How to Identify Real Emeralds at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Kennon Young. Kennon Young is a GIA graduate gemologist and JA jewelry technician. He received the highest certification in the jewelry appraisal industry, the ASA Gemologist in 2016.
There are 18 references cited in this article that you can see at the bottom of the page.
This article has been viewed 6,433 times.
Many “emeralds” are actually green gems, green glass, or imitations made from a variety of materials. You need to do a lot of testing before you can come to a conclusion whether a gem is real or fake, as the results are not always accurate without specialized gemological equipment. If you have an emerald, you might also want to try to see if it’s a natural or a lab-created synthetic.
Steps
Emerald Review
- Air bubbles that occur only in natural emeralds are located near impurities of various shapes. If you only see a cloud of air bubbles without other impurities, the gem is probably glass – but it could also be a synthetic emerald. [2] X Research Source
- The line between emerald and green beryl is very thin – two jewelers may not agree on the classification of a gem.
- Strong dichroism (two distinct colors) is a sign of high-quality emeralds. [11] X Research Source
- Results may be irregular due to internal reflections from a surface, to the characteristics of fluorescent light, or to light reaching the viewing cell without passing through the stone. [12] X Research Source In addition to this, you should use other methods to get accurate results instead of using only one method.
- Synthetic emeralds are much cheaper than natural emeralds, but not as cheap as most other synthetic stones. [14] X Research Source A small synthetic emerald costs approximately VND 1.5 million per carat.
Kennon Young
Gemstone Expert
Kennon Young is a GIA graduate gemologist and JA jewelry technician. He received the highest certification in the jewelry appraisal industry, the ASA Gemologist in 2016.
Gemstone Expert
If the emerald is attached to a piece of jewelry, you need to check the attachment as well. If the gem is attached with glue instead of being held with a set of pins, it is likely a fake. Also, if you see round cross-section seams it’s much more likely that it’s cast stone or plastic.
- Find a jeweler licensed by a national organization, such as the American Society of Gemstones or the American Gemological Association in the US. A degree in the gem trade is also a plus.
- Avoid appraisers that are affiliated with a certain retailer, especially with a retailer looking to sell you the gem you wish to appraise.
- Inspection fees often vary considerably and can be per item, hourly or per carat. You should not choose an assessment service that charges a percentage of the value of an emerald. [15] X Research Source
Get to know synthetic emeralds
- For a solid test, move on to the next step to use an emerald test filter.
- If you don’t want to buy filters, you can switch to other tests. These tests still require some equipment, as synthetic emeralds are difficult to discern with the naked eye.
Use filter
- In some cases, you’ll also need a jeweler’s magnifying glass to get a close look. Most emeralds do not need this tool for viewing.
- Place emerald under incandescent light on a flat white background. (Fluorescent lighting can skew results.)
- Cover the metal or other stones attached to the emerald with a tissue to prevent the colors from reflecting.
- Hold your Chelsea glasses close to your eyes and notice the color you see through the filter from a distance of 25 cm or a little closer.
- If the emerald is red when viewed through the Chelsea filter, take the next step to test it through the synthetic filter.
- If the emerald is green through the Chelsea filter, you will move on to the test with the confirmation filter.
- If the emerald has a red-purple color, it is a synthetic gem. You can confirm the color by looking through both types of filters (synthetic and confirmed) – if the gem is green through both glasses, it is synthetic. If the gem is green through the synthetic glass but red through the confirmation glass, it is a natural gem.
- Hold the emerald about 10 cm away from the light source and observe through the synthetic filter.
- If you still see red or pink, the gem is a synthetic emerald made with the flux method.
- If you see a green tint this time, it’s a natural emerald, possibly from Cpumbia or Russia.
- Move the jade about 10 cm away from the light source and observe through the synthetic filter.
- If it’s green-blue, lilac, or pink, it’s a hydrothermally synthesized emerald.
- If you see that the gem is still green (not cyan), move on to the next step.
- If the gem is transparent and almost free of impurities, it is almost certainly a synthetic hydrothermal emerald.
- If the magnifying glass reveals many minor flaws (needle crystals, blotches, etc.) the gem is a natural emerald containing vanadium and/or iron, such as emeralds mined from jade mines in Zambia, Brazil and India.
Other test methods
- If there is an “inclusion” in the gem that includes both air bubbles and crystals, you have a natural emerald. [20] X Research Source This is called a “three-phase inclusion.”
- Some crystals occur only in natural emeralds: bamboo green actinpite filaments, mica flakes, or pyrite crystals. [21] X Research Source[22] X Research Source[23] X Research Source
- Yellow, olive green or magenta fluorescence is a sure sign that it is synthetic. [24] X Research Sources[25] X Research Sources
- If there is no fluorescence at all, the gem may be a natural emerald, although it is uncertain. There is a type of synthetic emerald that also has no fluorescence. [26] X Research Sources
- Earthy pink or red-orange fluorescence may indicate natural or synthetic jade.
Advice
- A refractometer is a great tool for identifying gems, but can be expensive and difficult if you haven’t learned how to use it. If you can use a refractometer, check to see if the gem has a refractive index between 1.565 and 1.602; which is about the refractive index of natural emeralds. [27] X Research Source You also need to check for optical birefringence (double refraction) – around 0.006. Synthetic emeralds have an optical birefringence of about 0.006 or significantly less, and a refractive index usually between 1.561 and 1.564 or possibly as much as 1.579. [28] X Research Source[29] X Research Source[30] X Research Source If the results fall outside this range, the stone is most likely fake.
- A term that sounds like the name of the country of origin (“Cpombia”; “Brazil”) actually refers only to the appearance of the gem. Each region typically produces emeralds of a certain color, and gems matching that description are often named after the region. This is just a general rule, as each region can produce different types of jade. [31] X Research Source
Warning
- Emerald is hard to scratch but its brittleness is enough to break on impact. Hammer is not a good tool for testing gems!
This article was co-written by Kennon Young. Kennon Young is a GIA graduate gemologist and JA jewelry technician. He received the highest certification in the jewelry appraisal industry, the ASA Gemologist in 2016.
There are 18 references cited in this article that you can see at the bottom of the page.
This article has been viewed 6,433 times.
Many “emeralds” are actually green gems, green glass, or imitations made from a variety of materials. You need to do a lot of testing before you can come to a conclusion whether a gem is real or fake, as the results are not always accurate without specialized gemological equipment. If you have an emerald, you might also want to try to see if it’s a natural or a lab-created synthetic.
Thank you for reading this post How to Identify Real Emeralds at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: