You are viewing the article How to Fix Print Spooler lỗi at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 13 references cited in this article that you can view at the bottom of the page.
This article has been viewed 5,255 times.
Print Spoper is a tool that helps Windows computers interact with printers and conduct printing in sequence. If you see any error lines related to Print Soper, it means that the tool is faulty or cannot interact properly with other software. You will probably need to try several ways to fix the Print Spoper error.
Steps
Change the properties of Print Soper
- Press Windows key + R to open the Run dialog box. Type services.msc and press ↵ Enter . Double-click Print Spoper.
- Another way is to click Start → Contrp Panel → Administrative Tops → Services → Print Spoper
- First failure: Select Restart the Service
- Second failure: Select Restart the Service
- Subsequent failures: Choose Take No Action
- Reset fail count after: Type to 1 day
- Restart service after: Type in 1 minute
- Once done, click Apply .
- Return to the Services window. If you closed this window, reopen it as you did in the first step.
- Search for the name of one of the services you see in the Dependencies table above, under the Name column.
- Confirm that the word “Started” is in the Status column of that row.
- Confirm that the word “Automatic” is in the Startup Type column of that row.
- If one of the services you just searched for doesn’t have such a word, stop and run it. You can do this using the icon in the Services window, or by double-clicking the service name and clicking the buttons in the Properties window.
- If the Stop and Start icons are gray, or after stopping and running still do not change the value to “Started” and “Automatic”, you can try reinstalling the driver (driver) as described below . [6] X Research Resources If that doesn’t work, you may need to look at the service’s specific troubleshooting instructions, which may include risky Registry editing. [7] X Research Sources
Restore the printer’s default state
- Open the Services window (press Windows key + R, type services.msc, press Enter).
- Right-click the Print Spoper and click Stop if the Print Spoper hasn’t stopped.
- Find the path C: Windowssystem32spopPRINTERS and open this file. You may need to show hidden files and/or enter an administrator password.
- Delete everything in the folder. Do not delete the PRINTERS folder. Note that this step will stop all print jobs in progress, so make sure no one on your network is using the printer.
- Return to the Services window, select Print Spoper and click Start.
- Unplug the printer or disconnect it from the wireless printer.
- Search for “Devices and Printers” in the search bar, then click to open a new window.
- Right-click the printer icon that is not printing. Click “Delete” located in the drop-down menu.
- Left-click any other printer icon, then click Print Server Properties on the menu bar at the top.
- In the Properties window, click the Drivers tab.
- Select the driver for the deleted printer, then click Remove .
- If you select “Remove driver and driver package”, the installation package will also be removed. You should only do this if you know where the new installation package for that driver is located.
- Go to Start → Administrative Tops → Print Management and log in with the administrator password. If you can’t find it, try going to Start → Contrp Panel → System & Security → Administrative Tops → Print Management .
- In the left interface pane, click the arrow next to Print Servers to pop up the list.
- Click the arrow next to your computer (recorded as local).
- Click Drivers in the left pane. Right click on each driver used by the printer and select “Delete” to uninstall it. (You won’t be able to uninstall it if another printer is using that driver.)
- Another way is to right click on the driver and select “Remove Driver Package”. This is the step to uninstall the driver and remove the installation package. This step is sometimes necessary, but you won’t be able to reinstall the driver until you download a new installation package.
- Connect to the printer to reinstall. Download the new driver if you removed the driver package.
Scan system files
- This step returns the system files to their default state. If you have edited them intentionally, back up your computer before starting the scan. [12] X Research Source
- If the message says “Windows Resource Protection found corrupt files and successfully repaired them”.
- If the message says “Windows Resource Protection found corrupt files but was unable to fix some of them”.
- If you see any other message lines, you can try another way in the page.
- In the Command Prompt, type findstr /c:”[SR]” %windir%LogsCBSCBS.log >”%userprofile%Desktopsfcdetails.txt” and press ↵ Enter .
- Search for Sfcdetails.txt in the Desktop and open it.
- Search for today’s report. Search for the name of the corrupted or lost file.
- You can also extract files from the Windows installation disc. [14] X Research Source
- In the Command Prompt, type takeown /f and then type a space, type the absolute path and the name of the corrupted file. That line looks like this: takeown /f C:windowssystem32pdfile. Press ↵ Enter .
- Next, type the command icacls (path to corrupted file) /grant administrators:F — fix “(path to corrupted file)” to the path and filename above.
- Convert the new file by typing copy (path to new file) (path to corrupted file) , correcting the part in parentheses to the correct path and filename.
Advice
- Windows Server 2003 and Windows XP Professional x64 versions may experience an error that prevents the computer from receiving print jobs from the printer. You can download the fix from the Microsoft support website. [16] X Trusted Source Microsoft Support Go to Source
- There are many tools that you can download to attempt to fix the Print Spoper automatically. You should only download files from trusted sources, otherwise your computer may be infected with viruses.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 13 references cited in this article that you can view at the bottom of the page.
This article has been viewed 5,255 times.
Print Spoper is a tool that helps Windows computers interact with printers and conduct printing in sequence. If you see any error lines related to Print Soper, it means that the tool is faulty or cannot interact properly with other software. You will probably need to try several ways to fix the Print Spoper error.
Thank you for reading this post How to Fix Print Spooler lỗi at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: