You are viewing the article How to Fix a Floating Zipper at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 27,845 times.
Many times the zipper on the pants is very easy to fall off on its own, to avoid this situation on a busy back-to-school day or want to put on an old pair of pants that should have been thrown away, you can use a keyring or elastic band. to keep the pants zip. If the slider on the buckle is severely damaged, replace it with a new one. You also need to take care to prevent the buckle from being worn or damaged.
Steps
Use a keyring or an elastic band
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/3/30/Stop-a-Zipper-from-Unzipping-Itself-Step-1-Version-4.jpg/v4-728px- Stop-a-Zipper-from-Unzipping-Itself-Step-1-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/3/30/Stop-a- Zipper-from-Unzipping-Itself-Step-1-Version-4.jpg/v4-728px-Stop-a-Zipper-from-Unzipping-Itself-Step-1-Version-4.jpg”,”smallWidth”:460 ,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Find a keychain the size of a dime. To fix a loose zipper, you can use a small metal eyelet about the size of a dime, preferably a flat, heavy-duty eyelet. [1] X Research Sources[2] X Research Sources
- If you want more flexibility, you can also use an elastic band to fix the zipper that drifts down and gets stuck in the middle of the zipper. The elastic will stretch just enough to attach the slider on the zipper to the button.
Hook the keychain into the hole on the handle. You will gently thread the eyelet into the hole at the end of the puller on the slider. Check to make sure the eyelet is firmly attached to the pulley. [3] X Research Sources
- If you’re using an elastic band, you’ll thread the elastic through the hole in the handle, then interlock the two ends to form a knot. You need to tie so that the longer end of the rope is exposed.
Hook eyelets on pants buttons. After hooking the eyelet on the slider, you will hook it to the button of your pants. [4] X Research Sources
- If using an elastic band, pull the longer part of the rope and hook it to the button of your pants.
- If you want to fix the zippers on clothes other than trousers, you can hook an eyelet or an elastic band to a button on your garment, such as a button on a skirt or skirt. Note that this works better on skirts or skirts with hidden zippers because if the zipper is visible, the buckle loop or elastic you’re using will be exposed.
Zip up your pants and close the buttons. You will hold the keyring or elastic band in place on the button and pull the zipper up. The fastening section should cover both the top of the zipper and the eyelets or elastic bands. With the help of a keychain or an elastic band, the zipper will not slip. [5] X Research Sources
- Remember to be careful when going to the bathroom because you will have to unbutton your pants, then unfasten the keyring before you can take them off.
Replace broken slider
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/d/db/Stop-a-Zipper-from-Unzipping-Itself-Step-5-Version-2.jpg/v4-728px- Stop-a-Zipper-from-Unzipping-Itself-Step-5-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/d/db/Stop-a- Zipper-from-Unzipping-Itself-Step-5-Version-2.jpg/v4-728px-Stop-a-Zipper-from-Unzipping-Itself-Step-5-Version-2.jpg”,”smallWidth”:460 ,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Prepare the necessary tools and supplies. If the zipper frequently slips down on its own, it may be because the slider is damaged and needs to be replaced. You can replace the slider yourself at home with just a few tools and supplies as follows: [6] X Research Source
- Crab claw pliers. You can buy these pliers at the hardware store, they are used to cut nails, wires and stop zippers.
- A tweezers.
- Pointed pliers.
- New slider. You can buy a slider at a tailor or fabric store. Remember to buy a coil slider if using a coil zipper and buy a plastic slider if the zipper has plastic teeth. Coil buckles are made from twisted yarn, plastic buckles are made of plastic. [7] X Research Sources
- Block the pants buckle for replacement. You can use a metal zipper stopper (for coil buckles) or a plastic stopper (for plastic buckles).
Unlock the pants and locate the buckle stopper. The trouser buckle is a small detail used to prevent the slider from slipping out of the cog. Slide the cloth covering the lock stopper back, and use your index finger and thumb to hold the front part of the lock on the same side as the slider. [8] X Research Sources
Use pliers to unfasten the zipper. Note that you only need to cut the plastic or metal buckle stopper, do not affect the cloth tape behind the buckle to avoid damaging the zipper. [9] X Research Source
- After cutting and removing the lock stopper, use tweezers to remove the remaining lock stopper to ensure it is completely removed.
Slide the damaged slider off the buckle. After unblocking the buckle, you should be able to easily pull the slider out of the zipper and replace it with a new one. You may need a slight tug to pull the new slider over the old lock stop. [10] X Research Source
- Remember to keep the right side of the slider facing up as you slide it into the zipper. After being attached to the zipper, the slider needs to move up and down easily.
Fit the new zipper stopper to the zipper. You’ll use the new locking tweezers, then bring the stopper foot onto the fabric of the zipper, right where the old buckle was. [11] X Research Source
- Use the sharp-pointed pliers to press the lock stopper into the zipper edge, the buckle stopper will pierce the back.
- Continue to use pliers to squeeze the lock to fix the position of the lock, then try the new zipper to see if the lock runs smoothly and still slides down by itself.
Zipper Care
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/f/fe/Stop-a-Zipper-from-Unzipping-Itself-Step-10-Version-2.jpg/v4-728px- Stop-a-Zipper-from-Unzipping-Itself-Step-10-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/f/fe/Stop-a- Zipper-from-Unzipping-Itself-Step-10-Version-2.jpg/v4-728px-Stop-a-Zipper-from-Unzipping-Itself-Step-10-Version-2.jpg”,”smallWidth”:460 ,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Pull all the zippers up before putting the clothes in the washing machine. To protect the zipper, be sure to unzip all pants, tops, skirts, skirts and shorts before washing. [12] X Research Source
- To make sure the buckle doesn’t come off during washing and drying, you can use a pin to secure the buckle by passing the needle through the slider and inserting it into your garment.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/a/a8/Stop-a-Zipper-from-Unzipping-Itself-Step-11-Version-2.jpg/v4-728px- Stop-a-Zipper-from-Unzipping-Itself-Step-11-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/a/a8/Stop-a- Zipper-from-Unzipping-Itself-Step-11-Version-2.jpg/v4-728px-Stop-a-Zipper-from-Unzipping-Itself-Step-11-Version-2.jpg”,”smallWidth”:460 ,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Dry zipped clothing on low heat. High temperatures can damage locks, especially plastic ones. Use low heat and minimize drying time. Agitation in the dryer can cause some types of locks to be damaged. [13] X Research Source
- You should also take the zippered clothes out of the dryer and lay them flat as soon as they are done drying. Doing so will prevent the lock from twisting, thus avoiding lock jams and other problems.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/3/35/Stop-a-Zipper-from-Unzipping-Itself-Step-12-Version-2.jpg/v4-728px- Stop-a-Zipper-from-Unzipping-Itself-Step-12-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/3/35/Stop-a- Zipper-from-Unzipping-Itself-Step-12-Version-2.jpg/v4-728px-Stop-a-Zipper-from-Unzipping-Itself-Step-12-Version-2.jpg”,”smallWidth”:460 ,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Know that there may be wrinkles around the zipper. Don’t worry too much if around the zipper is wrinkled after washing. Most garments will shrink a bit during the wash and cause the buckle to wrinkle. These wrinkles are usually not too prominent, depending on the material of the dress is the zipper material. [14] X Research Source
- Clothing made of 100% cotton is very susceptible to shrinkage, which in turn causes visible wrinkles around the cotton-ppyester fabric of the zipper. You should hang clothes made of cotton and other shrinkable materials and hang them to dry instead of drying them in the dryer.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 27,845 times.
Many times the zipper on the pants is very easy to fall off on its own, to avoid this situation on a busy back-to-school day or want to put on an old pair of pants that should have been thrown away, you can use a keyring or elastic band. to keep the pants zip. If the slider on the buckle is severely damaged, replace it with a new one. You also need to take care to prevent the buckle from being worn or damaged.
Thank you for reading this post How to Fix a Floating Zipper at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: