You are viewing the article How to Connect a VCR to a TV at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 3,162 times.
This wikiHow teaches you how to connect a VHS (Video Home System) or VCR (Video Cassette Recorder) player to your TV. Although VHS is now considered an obsolete technology, you can still connect a VHS tape player to most TVs using a coax cable or AV cable set. If the video player does not support coaxial cable and the TV does not support AV cable, you can still use an RCA-to-HDMI adapter to connect using AV and HDMI cables.
Steps
Use coax cable
- Both the TV and VHS tape player must have a coaxial cable port to apply this method.
- If your TV or VCR doesn’t have a coax port, you can still use an AV cable to connect it to your video player.
- If you don’t have a coax cable, you can buy it online or at an electronics store.
- You can tighten the connection belt so that the end of the cable attaches more firmly to the end of the VHS tape.
- Below the coax port on the top of the VHS tape, there is usually a word like “TO TV”.
- You must tighten the cable end if necessary.
- If the power cable of the video player is detachable, you need to connect the power cable to the power port of the device first.
- With some VCRs, you need to set up a channel on the VCR itself first before you can play the tape.
- If you want to play VHS tapes with your VCR, just insert the tape and press “Play” to start watching.
Use AV . cable
- The white and red cables are for audio.
- Yellow cable for pictures.
- If you don’t have an AV cable, you can buy it online or go to an electronics store. AV cables are relatively cheap.
- If you find the red and white input but don’t see the yellow one, look for the green one that says “Video”. If your TV has one of these ports, you can still use an AV cable.
- If the TV doesn’t have an AV input, you’ll need to purchase an RCA-to-HDMI adapter ( not the HDMI-to-RCA type) and an HDMI cable.
- Some VCRs only support mono audio, meaning there’s only one red and white port on the back of the player. You just connect normally and leave the unsupported cable end.
- You need to make sure that all the cable ends are in the same input area, row or column. Input areas are usually numbered.
- If you are using an RCA-to-HDMI converter, proceed as follows: plug the AV cable into the colored port on the adapter, the other end into the HDMI port on the RCA adapter, the other end into the HDMI port of the RCA adapter. TV and plug the adapter’s power cable into a power source (such as a wall outlet).
- If the power cable of the video player is detachable, you need to plug the power cable into the power port of the device first.
- If you want to play a VHS tape with a VCR, simply insert the tape and press “Play” to start watching.
Advice
- If you use a receiver to control all of your TV’s inputs, you can plug the VCR into the receiver instead of the TV. Most receivers have HDMI and AV ports.
- Some TVs and VCRs support S-Video cables. S-Video cable is of higher quality, used to replace the yellow AV (video) cable.
Warning
- Not all TVs are capable of supporting older video players. You should go online to check your TV’s list of supported hardware if you have any questions about purchasing a TV or VCR.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 3,162 times.
This wikiHow teaches you how to connect a VHS (Video Home System) or VCR (Video Cassette Recorder) player to your TV. Although VHS is now considered obsolete technology, you can still connect a VHS tape player to most TVs using a coax cable or AV cable set. If the video player does not support coaxial cable and the TV does not support AV cable, you can still use an RCA-to-HDMI adapter to connect using AV and HDMI cables.
Thank you for reading this post How to Connect a VCR to a TV at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: