You are viewing the article How to Connect 2 Routers to Extend Network at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Spike Baron. Spike Baron is the owner of Spike’s Computer Repair. With more than 25 years of experience in the technology industry, his business specializes in desktop and Mac repair, used computer sales, virus removal, data recovery, software upgrades, and more. Hardware. He has a CompTIA A+ certification and is a Microsoft solutions expert.
There are 7 references cited in this article that you can view at the bottom of the page.
This article has been viewed 79,067 times.
This article shows you how to add a second router to your home or small business network. If you want to add more computers or other devices to your home or small business network but don’t have enough ports, try adding a second router. Besides expanding the network, the second router is also installed in locations where Wi-Fi is “dead” due to weak or non-existent wireless signal.
Steps
Set up the first router
- Some routers incorporate the functionality of a high-speed modem. If router 1 has this function, you only need to connect it with a network cable.
- The WAN port is also known as “Internet.”
Spike Baron
Network Engineer & Desktop Support
Spike Baron is the owner of Spike’s Computer Repair. With more than 25 years of experience in the technology industry, his business specializes in desktop and Mac repair, used computer sales, virus removal, data recovery, software upgrades, and more. Hardware. He has a CompTIA A+ certification and is a Microsoft solutions expert.
Network Engineer & Desktop Support
Carriers often limit your internet speed. So connecting to a second router won’t help. You should talk to your carrier first to see if adding a second router improves internet speed or if they can increase the limit for you.
- You can also connect to the router without wires by entering the wi-fi name and password.
- Here are a few default IP addresses of routers that are used by many people:
- 2Wire: 192.168.1.1, 192.168.0.1, 192.168.1.254, 10.0.0.138
- Apple: 10.0.0.1
- Belkin: 192.168.1.1, 192.168.2.1, 10.0.0.2, 10.1.1.1
- Dlinks: 192.168.1.1, 192.168.0.1, 192.168.0.101, 192.168.0.30, 192.168.0.50, 192.168.15.1, 192.168.254.254, 192.168.1.254, 192.168.0.10, 192.168.15.1, 10.0.0.1, 10.0.0.2, 10.1.1.1, 10.90.90.90,
- Netgear: 192.168.0.1, 192.168.0.227 [2] X Research Source
- Most routers choose “admin” as username and password. You can also try entering “Password” or “12345678” in the password field. With some routers, the username or password is left blank. [3] X Research Sources
- If you entered the correct password but still can’t connect, check the user manual or the manufacturer’s website for how to factory reset your router. [4] X Research Sources
- These settings are usually found under “Network settings” or “LAN settings”. The router’s admin interface will vary by manufacturer and model.
- In most cases, the DHCP server is enabled by default.
Set up a second router
- With most routers, the IP address will be 192.168.0.1, 192.168.1.1 or 10.0.0.1.
- With most routers, the username and password is usually “admin”.
- Look for the “LAN” or “Local Network” option on the admin interface. You will see a box containing the current IP address.
- Replace the current IP address with the new IP address. The new IP address on router 2 must be in the same subnet as router 1. That means the first three groups of numbers in the IP addresses of both routers must be the same. You just change the number after the fourth dot of the new IP address so that it differs from router 1. This IP address must be different from the IP address being assigned to another device.
- You’ll find these settings below a menu called “Wireless,” “Wi-Fi setup,” or something similar.
- If you are not sure about router 1’s SSID and password, try looking on the device.
- If router 2 is not a wireless router, skip this step.
Internet connection for your system
- Make sure you don’t attach the connection to the WAN port because the two ports look similar.
Advice
- Don’t be afraid to ask for help. There are many forums that provide useful information, and you can always call your carrier for technical support.
- Write down the IP addresses of your modem, router, and all connected computers. This will help you fix connection problems.
- To increase security, you should install a 3rd router (NAT). If you are adding a 3rd router, connect an Ethernet cable from that device’s WAN port to the LAN port on router 1 or 2. Next, enable DHCP on router 2 and assign it to a network child is different from the devices on the network.
Warning
- If you allow strangers to access your Wi-Fi network, they will easily access the files of the connected computer.
This article was co-written by Spike Baron. Spike Baron is the owner of Spike’s Computer Repair. With more than 25 years of experience in the technology industry, his business specializes in desktop and Mac repair, used computer sales, virus removal, data recovery, software upgrades, and more. Hardware. He has a CompTIA A+ certification and is a Microsoft solutions expert.
There are 7 references cited in this article that you can see at the bottom of the page.
This article has been viewed 79,067 times.
This article shows you how to add a second router to your home or small business network. If you want to add more computers or other devices to your home or small business network but don’t have enough ports, try adding a second router. Besides expanding the network, the second router is also installed in locations where Wi-Fi is “dead” due to weak or non-existent wireless signal.
Thank you for reading this post How to Connect 2 Routers to Extend Network at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: