• About
  • Contact
  • Cookie
  • Disclaimer
  • Privacy Policy
  • Change the purpose of use

Tnhelearning.edu.vn - Various useful general information portal

  • Photo
  • Bio
  • How To
  • Tech

How to Clean Tiled Floors

February 20, 2024 by admin Category: How To

You are viewing the article How to Clean Tiled Floors  at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.

X

wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 25 people, some of whom are anonymous, have edited and improved the article over time.

This article has been viewed 2,782 times.

Tiled flooring is a very durable flooring for kitchens, bathrooms and other frequently wet areas of the home. With proper care, tiled floors can look like new after many years. You should learn the basic tile floor care process, deep cleaning techniques, and how to clean stained tile grout. These techniques are suitable for both ceramic and artificial tiled floors. On the other hand, always remember not to over-clean tiled floors.

Table of Contents

  • Steps
    • Basic tiled floor care
    • Deep cleaning method
    • Cleaning the grout
  • Advice

Steps

Basic tiled floor care

Sweep or vacuum daily. This step will remove dirt, food crumbs, and other debris from the tile floor. Dirt located in wet areas can quickly turn into a hard-to-remove layer of grime.

  • In addition, you should sweep or vacuum the house before mopping or cleaning.
  • After dusting, use a dry duster or dry mop to clean the floor.
Wipe the floor with warm water. If the floor is spotless or doesn’t need a thorough cleaning, a damp mop is enough to clean the floor. Rinse the mop with warm, clean water after mopping part of the room and then repeat until the entire floor is clean.

  • You can add a little soapy water to the mixture to wipe away dirt and debris that accumulate daily.
  • To keep your floors shiny every day, simply use a damp, clean duster to clean the floor, or consider using a dry mop like Swiffer.
READ More:   How to Take Care of Baby Turtles
Dry the floor. Whether you use water or water mixed with detergent, you will need to use a dry mop to dry every small area of the room (just like when using a wet mop). This step helps prevent new dirt from accumulating quickly and staining the grout.
Wipe up spilled water on the floor immediately. If you spill juice or filtered water on the floor, you need to clean it up immediately. The longer it is left, the more time the water has to penetrate the grout. Dried orange juice and other sugary liquids also often become uncomfortably sticky.
Use disinfectants to clean up more unsanitary liquids. If your pet accidentally “pees” or you accidentally drop a piece of raw meat on the floor, you should spray disinfectant directly on the stain and wipe it immediately.

  • If possible, spray disinfectant only on dirty areas. Harsh chemicals can damage or stain tiled floors.

Deep cleaning method

Wipe the floor with a mixture of warm water and vinegar. Mix 1/2 cup of vinegar with 3.8 liters of water and proceed to clean the floor as usual. If the floor is not as clean as you want, you can use clean water and detergent to clean it again.

  • Wipe the floor with clean warm water after using the cleaner. This step is very important to help remove all remaining soap solution on the tile floor, avoiding dust accumulation.
  • Do not use vinegar or other chemicals on marble floors. You can read the article on How to clean marble for more ways to clean floors safely.
Remove stains on tiled floors. Long-term spills on tiled floors can cause stains. You need to use the mixture for spot cleaning.

  • Prepare a mixture of scouring powder and warm water in a ratio of 1:1.
  • Use a clean cloth to rub the mixture on the stain and let it sit for 5-10 minutes.
  • Scrub the stain with a soft brush, then use a towel and warm water to wipe away any remaining mixture.
  • Repeat the process if stains are still visible.
READ More:   How to Live After a Pet Dies
Remove mold from tiled floors. The tiled floor in the bathroom occasionally gets moldy. The best prevention is to let the moist air out after you shower and to keep the floor dry. If mold builds up, you can use an ammonia solution to treat it.

  • Wear rubber gloves to protect your hands. Make sure the bathroom is well ventilated.
  • Prepare a mixture of ammonia and water in the ratio 1:1.
  • Use a soft brush to rub the ammonia solution onto the moldy area.
  • Use clean water to clean the floor after the mold is gone.
Remove rust stains on tiled floors. You probably don’t have to remove rust as often, but if you do, you should use kerosene to remove rust.

  • Wear rubber gloves to protect your hands.
  • Dampen a clean cloth with kerosene.
  • Use a rag soaked in kerosene to scrub away the rust.
  • Use warm water to remove the rust and kerosene residue and repeat the process if the rust is not completely gone.

Cleaning the grout

Use a pencil eraser. This household trick is very helpful in cleaning small stained grout. Simply rub the eraser tip of the 2B pencil until the stain disappears. Use a clean white or pink eraser.

  • An abrasive sandpaper or grout brush may be more effective for stubborn stains.
Use baking soda. Using this natural method can help lighten most dirty grout.

  • Mix the baking soda and water together.
  • Use an old brush to apply the mixture to the dirty grout. Rub the mixture onto the grout.
  • Use warm water to clean the grout after scrubbing.
  • For more stubborn stains, you should let the mixture sit for a few minutes before scrubbing.
  • Remove stubborn stains with bleach. If natural methods don’t work, you can use a bleach solution.

    • Wear rubber gloves to protect your hands.
    • Mix bleach with water in a ratio of 3:1 if the grout is white. If the grout is colored, you will have to use filtered water. Do not use bleach to stain colored grout as it may discolor grout.
    • Use a toothbrush or the edge of a sponge to rub the solution onto the grout. Be careful not to let the bleach mixture get on the tile.
    • Wipe the floor with warm water after completely removing traces of bleach.
    • After the floor is completely dry, you should carefully apply a layer of grout coating to the grout to prevent dust later on.
  • Advice

    • Cleaning and partially drying tiled floors by hand often yields better results than using a mop.
    • Grouting brushes or abrasive grout tools can be purchased at home appliance stores specifically designed for grout cleaning. Grout patching may be necessary, depending on the degree of wear of the grout.
    READ More:   How to Start Journaling
    X

    wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 25 people, some of whom are anonymous, have edited and improved the article over time.

    This article has been viewed 2,782 times.

    Tiled flooring is a very durable flooring for kitchens, bathrooms and other frequently wet areas of the home. With proper care, tiled floors can look like new after many years. You should learn the basic tile floor care process, deep cleaning techniques, and how to clean stained tile grout. These techniques are suitable for both ceramic and artificial tiled floors. On the other hand, always remember not to over-clean tiled floors.

    Thank you for reading this post How to Clean Tiled Floors at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.

    Related Search:

    Related Posts

    How to Create Curved Text in Photoshop
    How to fall asleep faster
    How to Install FBReader to Read eBooks

    Category: How To

    Previous Post: « How to Break Amniotic sac
    Next Post: How to Make Tomato Juice »

    Copyright © 2025 · Tnhelearning.edu.vn - Useful Knowledge