You are viewing the article How to Clean Soot on Tiles at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Chris Willatt. Chris Willatt is the owner and founder of Alpine Maids, the highest rated cleaning company in Denver, Cporado. He received his BS from Cporado University in 2012.
This article has been viewed 3,042 times.
A fireplace can add a cozy look to any home, but one of the inevitable annoyances is soot on the surrounding tiles. Soot can leave a permanent stain on contact with other objects, so it’s important that you clean the plaque at least once a year. To get rid of soot on tiles, you can use baking soda or white vinegar as a natural solution, or use a sodium phosphate chemical cleaner to get the tiles clean again.
Steps
Prepare before cleaning the fireplace
- If you use your fireplace for heating, consider cleaning it during the summer months, when you’ll use it less often.
- You can put away unburnt pieces of wood for later use.
Warning: Do not use newspaper, as the ink can smear on the floor when wet.
Use baking soda
- You should wear rubber kitchen gloves to protect your hands, or use a clean rag to spread the mixture.
- If you find the mixture too dry, you can spray water on it to re-moisturize it.
- Do not scrub too hard lest damage the tile.
Clean soot with vinegar
- You can buy aerosol cans at most home improvement stores.
Warning: Vinegar may be too strong for older tiles over 20 years old. [11] X Research Source In this case, you should replace it with a non-acidic cleaner, such as baking soda.
- If you have leftover vinegar solution, you can use it to clean bathrooms and kitchen countertops as a natural cleaner.
- You can sprinkle baking soda on the tile to remove the vinegar faster, but it will foam and can stain.
Soot removal with sodium phosphate
- You can buy latex gloves at most home stores.
Warning: Sodium phosphate can also damage the eyes. Wear safety glasses if you are afraid of chemicals splashing in your eyes.
- You can buy sodium phosphate at hardware stores.
- If there is still soot on the tile, apply more sodium phosphate mixture and scrub again.
- Clean up the floor coverings after cleaning.
Advice
- Use only clean, dry firewood to keep your fireplace clean for longer.
Warning
- Never use corrosive chemicals when cleaning soot on tiles. Many chemicals leave a flammable film on the tile surface and pose a hazard the next time you use the fireplace.
- Only start cleaning the heater when it has cooled down completely. The heat can remain smoldering in the ashes for days after setting the fire, causing you to burn.
Things you need
Use baking soda
- Baking soda
- Tarpaulin or cloth cover
- Gloves or rags
- Cleaning brush
Clean the fireplace with vinegar
- White Vinegar
- Aerosol
- Cleaning brush
Soot removal with sodium phosphate
- Sodium Phosphate
- Shove
- Glove
- Safety glasses (optional)
- Cleaning brush
- Sponge
This article was co-written by Chris Willatt. Chris Willatt is the owner and founder of Alpine Maids, the highest rated cleaning company in Denver, Cporado. He received his BS from Cporado University in 2012.
This article has been viewed 3,042 times.
A fireplace can add a cozy look to any home, but one of the inevitable annoyances is soot on the surrounding tiles. Soot can leave a permanent stain on contact with other objects, so it’s important that you clean the plaque at least once a year. To get rid of soot on tiles, you can use baking soda or white vinegar as a natural solution, or use a sodium phosphate chemical cleaner to get the tiles clean again.
Thank you for reading this post How to Clean Soot on Tiles at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: