You are viewing the article How to Clean Rings at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Kennon Young. Kennon Young is a GIA graduate gemologist and JA jewelry technician. He received the highest certification in the jewelry appraisal industry, the ASA Gemologist in 2016.
There are 7 references cited in this article that you can see at the bottom of the page.
To clean a ring, you need to know what material the ring is made of. Each metal reacts differently to certain chemicals, which you don’t want to risk damaging the ring. Light stains may be enough simply washing in warm filtered water with a soft cloth. For more stubborn stains, you can buy specialized jewelry cleaning products or use a mild toothpaste as an inexpensive at-home solution. The dull layer on the ring surface can be treated by soaking the ring in water mixed with ammonia. If your ring is delicate or precious, you should probably take it to a jeweler to have it professionally cleaned.
Steps
Identify ring material
- Clean the gold ring with a soft cloth and a special solution for gold. Avoid soap and chlorine. [1] X Research Source
- With silver rings, you usually just need to use a soft cloth and water to wash them. You can also purchase a specialized silver cleaning solution.
- Diamonds require specialized cleaning solutions. Go to a jeweler or buy it online. [2] X Trusted Source Gempogical Institute of America Go to Source
- With a cheap ring – the kind that you can find at a similar store – you can scrape off the grime with your fingers.
Use toothpaste
- Be sure to scrub any crevices or raised edges of the ring. Scrub your ring as if you were brushing your teeth, brushing gently, pressing firmly and thoroughly.
- You should clean your ring every few weeks or every few months, depending on how often you wear it. Set aside a toothbrush dedicated to cleaning jewelry and not for anything else.
Other methods
- Do not use any cloth or paper towel to clean the ring, as it may scratch the surface of the ring or damage the gemstones attached to the ring. Do not dry the ring with a 100% cotton cloth.
- It is important to use filtered water when washing rings. Try attaching a magnet to the flour sieve and turn on the faucet to run the water through the sieve before rinsing the ring. This will remove any magnetic metals that could damage silver, gold or other precious metals.
- If the ring is too dirty, you can add a few drops of dishwashing liquid to the water and stir it before rinsing.
- Wash the ring with soapy water.
- Scrub the ring clean.
- Rinse with warm water and let dry.
- Wrap foil in the lap of a bowl.
- Dissolve 1 tablespoon of baking soda with 1 cup of warm water in a foil-wrapped bowl.
- Drop the ring into the baking soda solution, making sure the ring touches the foil.
- Soak the ring in the solution for about 10-30 minutes or until the dull layer has dissolved.
- A jeweler can test your ring for precious metal and determine the quality of the metal. This information will help jewelers choose safe jewelry cleaning and polishing products.
- This is especially important for engraved rings. The cleaning process of the ring can cause the patterns or inscriptions on the ring to be lost. If your ring has special meaning, you should take it to a jeweler to secure it.
- A jeweler can advise you on the right machine for your jewelry and recommend the model you should buy.
Warning
- Do not press too hard, and do not use a friction scouring material if you are not sure it is safe for the metal.
- Be careful with carved rings. The cleaning process of the ring can cause the ring’s motifs or inscriptions to be lost.
- Do not soak the ring for more than the recommended time. The ring runs the risk of rusting if it stays in the water for too long.
This article was co-written by Kennon Young. Kennon Young is a GIA graduate gemologist and JA jewelry technician. He received the highest certification in the jewelry appraisal industry, the ASA Gemologist in 2016.
There are 7 references cited in this article that you can view at the bottom of the page.
To clean a ring, you need to know what material the ring is made of. Each metal reacts differently to certain chemicals, which you don’t want to risk damaging the ring. Light stains may be enough simply washing in warm filtered water with a soft cloth. For more stubborn stains, you can buy specialized jewelry cleaning products or use a mild toothpaste as an inexpensive at-home solution. The dull layer on the ring surface can be treated by soaking the ring in water mixed with ammonia. If your ring is delicate or precious, you should probably take it to a jeweler to have it professionally cleaned.
Thank you for reading this post How to Clean Rings at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: