• About
  • Contact
  • Cookie
  • Disclaimer
  • Privacy Policy
  • Change the purpose of use

Tnhelearning.edu.vn - Various useful general information portal

  • Photo
  • Bio
  • How To
  • Tech

How to Clean Oil on Cement Base

February 5, 2024 by admin Category: How To

You are viewing the article How to Clean Oil on Cement Base  at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.

X

This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.

The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.

There are 7 references cited in this article that you can see at the bottom of the page.

This post has been viewed 23,128 times.

If you have trouble removing grease stains from your driveway, don’t worry, because we have many ways to deal with them. You can use cleaning agents such as baking soda or dishwashing liquid, along with hot water and a wire brush to scrub the stains. If the oil stain is large, you can use a degreaser (bought at home appliance stores) and a wire brush to clean it. Finally, if you are a person who cares about the environment, use a microbiological cleaner, the microorganisms will eat away the oil stains without leaving harmful residues for the environment.

Table of Contents

  • Steps
    • Preparation and Procurement of Supplies
    • Cleaning Small Oil Stains
    • Cleaning Large Oil Stains

Steps

Preparation and Procurement of Supplies

Image titled 20481 1

Image titled 20481 1

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/42/20481-1.jpg/v4-728px-20481-1.jpg”,”bigUrl”:”https:// www.wikihow.com/images/thumb/4/42/20481-1.jpg/v4-728px-20481-1.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,” bigHeight”:410,”licensing”:”<div class=”mw-parser-output”></div>”}
Select a cleaning method. Depending on the condition of the stain, you will apply the appropriate method to clean the oil from the aisle.

  • If the oil stain is new or has a small area but is difficult to wash, you can apply detergent on top to clean it.
  • For small stains, you just need to use regular soap or laundry detergent.
  • For large oil stains, you may have to purchase a degreaser, or a microbiological cleaner to remove the oil stain.
Image titled Clean Oil Off a Driveway Step 2

Image titled Clean Oil Off a Driveway Step 2

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/1/14/Clean-Oil-Off-a-Driveway-Step-2-Version-4.jpg/v4-728px-Clean- Oil-Off-a-Driveway-Step-2-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/1/14/Clean-Oil-Off-a- Driveway-Step-2-Version-4.jpg/v4-728px-Clean-Oil-Off-a-Driveway-Step-2-Version-4.jpg”,”smallWidth”:460,”smallHeight”:261,” bigWidth”:728,”bigHeight”:413,”licensing”:”<div class=”mw-parser-output”></div>”}
Purchase all necessary supplies. You can buy all of the following in supermarkets, online or at your local grocery store. You will need a number of different supplies depending on the condition of the stain or the cleaning method you choose.

  • For small stains you need to buy: 1) detergent (baking salt, vinegar, soap, dishwashing liquid or laundry detergent) 2) bucket or can of water 3) wire brush or stiff bristle brush.
  • If the stain is small but firmly adhered, you must use the application method: 1) baking soda 2) acetone, solvent for varnish or xylene 3) a thin sheet of plastic slightly larger than the stain 4) a wire brush or stiff bristle brush .
  • For large stains you need to buy: 1) degreaser or microbiological cleaner [1] X Research Source 2) bucket or sprinkler 3) wire brush or stiff bristle brush. [2] X Research Source
  • If the oil stain is new or is expected to leak more, consider buying a bag of baking soda for future use.
READ More:   How to Get Rid of Fleas
Image titled Clean Oil Off a Driveway Step 3

Image titled Clean Oil Off a Driveway Step 3

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/b/ba/Clean-Oil-Off-a-Driveway-Step-3-Version-6.jpg/v4-728px-Clean- Oil-Off-a-Driveway-Step-3-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/b/ba/Clean-Oil-Off-a- Driveway-Step-3-Version-6.jpg/v4-728px-Clean-Oil-Off-a-Driveway-Step-3-Version-6.jpg”,”smallWidth”:460,”smallHeight”:261,” bigWidth”:728,”bigHeight”:413,”licensing”:”<div class=”mw-parser-output”></div>”}
Wear protective clothing or equipment if using a degreaser. Wear glasses to keep chemicals out of your eyes, and buy chemical resistant gloves at supermarkets. In addition, if you have a type of overalls that you usually wear when repairing cars, you should also wear them, or you can wear clothes that cover both hands and feet without worrying about dirt splashing on you. [3] X Research Sources
Keep pets and small children away. Remember to keep small children and pets out of the work area. If any accident occurs, go to the nearest hospital or call an ambulance immediately.
Use water from a bucket or water from a hose to clean the oiled area. Before handling the oil layer, you must wash away all the dirt on the walkway near the oil area. [4] X Research Source However, do not use high pressure water hose to clean the area, as the oil layer may penetrate deep into the substrate.

Cleaning Small Oil Stains

Pour the cleaner on the oiled area. Slowly pour liquid or powdered cleaner over the oil stain until it has completely covered the area. You can use one of the following common detergents: baking soda, vinegar, soap, dishwashing liquid, or laundry detergent. Then wait 15-30 minutes for the detergent to penetrate the oil if it is a liquid detergent. [5] X Research Sources
Use hot water and a brush to scrub the stain. You can heat the water while you wait for the bleach to penetrate the stain. Apply hot water from a bucket or hose to the oil stain and scrub vigorously with a wire brush or stiff bristle brush. Rub continuously for one to two minutes and rinse with hot or plain water. [6] X Research Sources

  • Repeat this washing sequence if the oil stain does not clear up. Wait about a day to see if the oil reappears, this is common with oil stains, if so you should wash it again.
READ More:   Tricks to effectively read other people's minds
Prepare a paste to clean small but stubborn oil stains. It is recommended that you use the paste on new oil stains, as highly absorbent material can absorb the oil. However, this method is only suitable for small and difficult to wash oil stains, cannot be applied to large oil stains. [7] X Research Sources

  • Make this mixture by mixing an absorbent substance such as sawdust or baking soda with a preparation solvent such as acetone, varnish solvent or xylene, to create a paste. These ingredients will interact with each other to remove the stain, the solvent is responsible for breaking down the oil texture and the absorbent material will draw it away.
  • Apply this mixture to the stain with a layer thickness of more than 5 mm.
  • Finally, cover a thin plastic sheet on the material and press down to fix the position of the cover.
  • You can stomp on the plastic to let the mixture get into the cracks in the cement. [8] X Research Sources
  • Wait a day for the mixture to work, then remove the plastic sheet and remove the bleach mixture, rinse the area with a hose or bucket of water and you’re done. [9] X Research Source
  • If the walkway floor is covered with a waterproof layer, the method of applying bleach should not be applied, because the waterproofing layer will be damaged.
Pour a few cans of Coca-Cpa or Pepsi on the oily spot. Then wait a day for the soda to soak into the oil stain, which is the cheapest and easiest way to remove the oil from the cement. A day later, use a hose or bucket of water to wash off the Coke and any remaining oil. If the stain is not gone, you have to find another way. [10] X Research Source

Cleaning Large Oil Stains

Apply an appropriate amount of degreaser to the area you want to wash. This is a specialized product for cleaning oil leaks from cars, and at the same time does not damage the cement floor on the walkway. These products can be used immediately after opening the bottle, strong and fast acting, can remove oil, grease or dirt deep in the substrate. Be sure to read the instructions for use and warning labels before use. [11] X Research Source

  • Wait 1-3 minutes for the bleach to soak into the stain, or for the time recommended by the manufacturer.
  • If the dirt has penetrated quite deeply, you should wait longer, but don’t wait until it dries.
  • For easy-to-clean stains, dilute one part bleach to five parts water. [12] X Research Source
READ More:   How to See Messages From Strangers in Facebook Messenger on Android Devices
Scrub the stain vigorously with a wire brush or stiff bristle brush. Wear chemical resistant gloves and scrub vigorously with a brush, wait for 5-10 minutes and then wash off the bleach with water. If you don’t see it clean, continue rinsing as in the original sequence. [13] X Research Source

  • Repeat the washing process if the stain is not gone. Wait about a day to see if the oil reappears, if so, wash it off as before.
  • Use a microbiological cleaner (not chemical) to clean the oil stain. This is an environmentally friendly product, priced at about 200,000 VND per liter. Microbiological detergents are often used to clean oil spills at sea. The single-celled microorganisms in the detergent will eat away the oil stains on the cement base without leaving harmful intermediate products. [14] X Research Source You can buy bio-detergent from BioFuture manufacturer with branch in Vietnam [15] X Research source
  • X

    This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.

    The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.

    There are 7 references cited in this article that you can view at the bottom of the page.

    This post has been viewed 23,128 times.

    If you have trouble removing grease stains from your driveway, don’t worry, because we have many ways to deal with them. You can use cleaning agents such as baking soda or dishwashing liquid, along with hot water and a wire brush to scrub the stains. If the oil stain is large, you can use a degreaser (bought at home appliance stores) and a wire brush to clean it. Finally, if you are a person who cares about the environment, use a microbiological cleaner, the microorganisms will eat away the oil stains without leaving harmful residues for the environment.

    Thank you for reading this post How to Clean Oil on Cement Base at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.

    Related Search:

    Related Posts

    How to Create Curved Text in Photoshop
    How to fall asleep faster
    How to Install FBReader to Read eBooks

    Category: How To

    Previous Post: « What is a washing machine? The reasons you should use a face wash right now
    Next Post: What is hyperthyroidism in pregnancy? Is hyperthyroidism dangerous? »

    Copyright © 2025 · Tnhelearning.edu.vn - Useful Knowledge