You are viewing the article How to Clean Hard Water Stains on Glass at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 19 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 5,213 times.
Hard water streaks are caused by minerals such as calcium and magnesium in the water. When the glass surface is wet, the water evaporates but the mineral streaks remain. Sprayers, car washes, and showers can all create hard water streaks on glass. Chemically, these streaks are alkaline and require acid to clean. With a few household ingredients, you can clean and prevent mineral stains.
Steps
Use a vinegar solution
Use other natural products
- Try rolling the lemon vigorously on a hard surface before slicing. This will make it easier for the lemon to squeeze out the juice.
- Squeeze the lemon juice and pour it into a spray bottle with water or use a towel to blot the lemon juice on the glass.
- Or you can also apply lemon directly on the glass. Just cut a lemon in half and rub the cut side onto the glass, scrubbing it a little hard.
- Let the lemon juice sit for a while, then use water or regular glass cleaner to clean the lemonade.
- Add several drops of essential oil to the water, using a sponge or washcloth to rub the solution onto the glass.
- Let it sit for a while, then scrub gently with a towel or sponge.
- Clean with water or ordinary glass cleaner.
- Mix a little water into the toothpaste so that it can be easily spread on the glass surface and save the toothpaste.
- Spread toothpaste on the glass and let it soak.
- Use a soft brush, towel or sponge.
- Use water to wash the toothpaste off the glass surface.
- Wash the glasses with water or regular glass cleaner, but make sure to dry them to avoid creating dry water streaks.
- Spread the paste on the glass and let it infuse. [6] X Research Sources
- Use a soft brush, towel or sponge.
- Use water to clean the paste on the glass.
- Rinse the glass with water or regular glass cleaner, but be sure to dry the glass so that the water does not create new stains.
Use a friction cleaning solution
Use cleaning products
- CLR
- Barkeeper’s Friend
- Kaboom
- Lime-away
- Some products recommend repeated wiping but not scrubbing, as scrubbing can cause splashes. [11] X Research Source
- It is best to test on a small part first to make sure the product does not damage the glass surface.
- Make sure the product does not splash on materials other than the glass surface being cleaned. Bleach can damage adjacent walls, window sills, tiles or vehicle paint.
- Wash your hands immediately after coming into contact with detergents, and never put your hands in your mouth, nose, or eyes immediately after coming into contact with detergents.
- Many cleaning products recommend use in a well-ventilated area to avoid poisoning with the gases produced by the product.
- Be sure to read the warning on the product label carefully.
Prevent water streaks
- Use a dry cloth when the glass is wet.
- Use a roller to remove standing water on the glass. This will keep the glass clean and clear. [13] X Research Source
Advice
- The methods you apply depend in part on the degree of deposition of the water streaks. The longer the water stains, the more powerful solutions must be used.
- You can use the same method to remove limescale from your coffee machine. Pour 25% white vinegar and 75% water into the water tank and run the machine. Repeat if limescale is not completely removed.
- The longer mineral deposits stay on the glass, the harder it is to remove.
- You can replace vinegar with lemon juice if available. Lemon has an acidic composition similar to vinegar, which can neutralize alkaline compounds.
- Kitchen counter cleaner works very well and can protect the glass from staining.
Warning
- Do not use abrasive products on natural stone or tiles. Always test the product on a small area before using it on a large surface.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 19 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 5,213 times.
Hard water streaks are caused by minerals such as calcium and magnesium in the water. When the glass surface is wet, the water evaporates but the mineral streaks remain. Sprayers, car washes, and showers can all create hard water streaks on glass. Chemically, these streaks are alkaline and require acid to clean. With a few household ingredients, you can clean and prevent mineral stains.
Thank you for reading this post How to Clean Hard Water Stains on Glass at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: