• About
  • Contact
  • Cookie
  • Disclaimer
  • Privacy Policy
  • Change the purpose of use

Tnhelearning.edu.vn - Various useful general information portal

  • Photo
  • Bio
  • How To
  • Tech

How to Adjust Watch Bands

January 21, 2024 by admin Category: How To

You are viewing the article How to Adjust Watch Bands  at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.

X

wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 13 people, some of whom are anonymous, have edited and improved the article over time.

This article has been viewed 12,930 times.

Today, many wristwatches are designed with bracelets made of leather or plastic, which have a row of holes along with a buckle that allows the user to easily adjust the size. However, many trendy watch brands and metal watches require us to remove the metal eye to make the strap smaller. This may sound difficult at first, but with just a few simple tools, you can completely do it yourself at home without having to waste time and money when taking your watch to a jeweler or repair place.

Table of Contents

  • Steps
    • Measure the watch band
    • Remove the eye of the strap
  • Advice
  • Things you need

Steps

Measure the watch band

Image titled Adjust a Watch Band Step 1

Image titled Adjust a Watch Band Step 1

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/d/de/Adjust-a-Watch-Band-Step-1-Version-7.jpg/v4-728px-Adjust-a- Watch-Band-Step-1-Version-7.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/d/de/Adjust-a-Watch-Band-Step-1- Version-7.jpg/v4-728px-Adjust-a-Watch-Band-Step-1-Version-7.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Put the watch on your hand. First you need to consider its width. [1] X Research Source

  • If the watch is loose to the wrist, you need to remove quite a few eyes.
  • If the watch is just a little loose, isn’t too uncomfortable to wear, and isn’t to the point of slipping out of your hand, adjustment may not be necessary.
  • If the watch is too tight, you will need to purchase additional links from the manufacturer to expand the band.
READ More:   How to Repair LCD Screen
Define the latch key. Pinch the watch band on both sides of the clasp until the band is the right size. [2] X Research Source

  • You need to make sure that the number of links to be removed is the same on each side of the clasp.
  • This is to ensure that the watch face remains in the center of the strap.
  • Write down the number of links to be removed on each side of the clasp.
Image titled Adjust a Watch Band Step 3

Image titled Adjust a Watch Band Step 3

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/f/fc/Adjust-a-Watch-Band-Step-3-Version-7.jpg/v4-728px-Adjust-a- Watch-Band-Step-3-Version-7.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/f/fc/Adjust-a-Watch-Band-Step-3- Version-7.jpg/v4-728px-Adjust-a-Watch-Band-Step-3-Version-7.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Prepare disassembly tools. Here are the tools you’ll need to adjust a watch band: [3] X Research Source

  • One or two latching tools. You will use them to push the pin that secures the links out of the hole.
  • Small nose pliers, help you pull the pin out.
  • Small hammer, jeweler’s type.
  • Make sure your work surface is flat and well lit. You need to collect all the pins that you removed from the rope.

Remove the eye of the strap

Place the clock on its side on the work surface. Keep the bottom of each link to be removed at a distance of 0.5 cm from the plane. [4] X Research Sources

  • Count the number of links that need to be removed, calculate the key word.
  • Find the position of the last link fixing pin.
  • This is where you need to proceed to remove the eye.
Use a bolt remover. Use a pin pusher to remove the eyelet securing pin. [5] X Research Sources

  • Press the pointed end of the pin remover onto the pin end.
  • If you don’t have enough force, you can use a hammer to drive the dowel remover into the hole to push the pin out of the hole.
  • A piece of pin will protrude from the other side of the eye.
  • Continue, use the hammer to nail the protruding pin further.
READ More:   How to Remove Epoxy Glue
Use pliers to pull the pin firmly. [6] X Research Sources

  • Once the pin pops out of the hole long enough for the tip of the pliers to grip, you can use pliers to remove it.
  • Use small nose pliers to clamp the pin.
  • Pull out the latch.
  • At this point, the number of eyes you need to remove on one side of the clasp will come off.
  • Repeat the process with the other side of the rope.
Remove the buckle from the link to be removed. You need to get the clasp to reattach the strap. [7] X Research Sources

  • Use the same method as when you removed the link.
  • The clasp is also connected to the link by a pin. You just need to use a hammer, push pin and pliers to remove the nail.
  • Then, reattach the clasp to the strap.
Fasten the buckle. Connect the eye of the clasp to the outermost link of one side of the strap. [8] X Research Sources

  • You will see a hole to install the hook securing pin.
  • Take one of the dowels you removed and insert it into this hole.
  • The pin should go through the hole with ease, only stopping slightly near the end.
  • Use a hammer to gently drive the flood pin into the hole.
  • Repeat the process for the other side of the clasp.
  • So your watch band has been properly aligned.
  • Test the watch. Now the loop is just right, not too big or too small. [9] X Research Source

    • If you accidentally remove more links than necessary, try to reattach each eye on each side of the wire.
    • If you haven’t removed enough links, re-measure how many links you need to remove to make the watch tighter but still comfortable.
    • Wear the watch for a few days to make sure it’s comfortable.
    READ More:   How to Enjoy Baileys Strawberries and Cream
  • Advice

    • Do not poke people with screwdrivers.
    • Choose a hard surface to limit movement of the watch while you make adjustments to the strap.

    Things you need

    • Latching tool
    • Hammer
    • Small nose pliers.
    • Watches with adjustable straps
    X

    wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 13 people, some of whom are anonymous, have edited and improved the article over time.

    This article has been viewed 12,930 times.

    Today, many wristwatches are designed with bracelets made of leather or plastic, which have a row of holes along with a buckle that allows the user to easily adjust the size. However, many trendy watch brands and metal watches require us to remove the metal eye to make the strap smaller. This may sound difficult at first, but with just a few simple tools, you can completely do it yourself at home without having to waste time and money when taking your watch to a jeweler or repair place.

    Thank you for reading this post How to Adjust Watch Bands at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.

    Related Search:

    Related Posts

    How to Create Curved Text in Photoshop
    How to fall asleep faster
    How to Install FBReader to Read eBooks

    Category: How To

    Previous Post: « 2 ways to make octopus with spicy cheese sauce ecstatic
    Next Post: Learn how to make easy-to-eat lemon basil flavored lollipops to help treat coughs for children »

    Copyright © 2025 · Tnhelearning.edu.vn - Useful Knowledge