You are viewing the article How to Adjust Eyeglasses at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Shaune Wallace, OD. Dr. Wallace is an ophthalmologist in Nevada. He received his OD degree from the College of Optometry of Southern California in 2006 and is a member of the American Optometric Association.
This article has been viewed 6,242 times.
After a period of use, the frames become easy to slip, bunch up on the nose, hurt the ears or simply warp. You can take your lenses to an eyewear store to have them adjusted, or you can adjust them yourself by following these steps.
Steps
Determine the positions that need to be adjusted
- If the lens has two focal points, this line will be on the lower eyelid. If the lens has three focal points, the upper line will be below the base of the pupil.
- If your glasses appear symmetrical when lying on your face but buckle when placed on a flat surface, this means that one of your ears is higher than the other. You need to bend the glasses to compensate for this misalignment of the ears. [2] X Research Source
Start adjusting the lenses
- For metal frames, you will use a small pliers to straighten the two glasses. Put on your glasses and look in the mirror to see if they are adjusted properly.
- Do not use cutting pliers. You must use flat nose pliers to avoid damaging your glasses.
- For plastic frames, the plastic at the end of the glasses needs to be heated with some heat source, such as a hair dryer, in order to be curled. Slowly use your hand to bend the tail of the fork to the desired position. Be careful when using a hair dryer as you can melt the plastic.
- Another way to bend plastic frames is to heat them under hot water for 15-25 seconds before adjusting. The magnifying glass will become more pliable for you to adjust, but be careful! The plastic part can break even when heated. [7] X Research Sources
- For metal frames, you will use pliers or your hand to adjust.
- For plastic frames, you need to heat the plastic part under hot water or with a dryer before curling the ends of the glasses.
- Be careful not to tighten the screw too tightly to avoid damaging the plastic or metal part that is being attached by the screw.
Avoid damaging your glasses
- Also note that you need to have your eyes checked at least annually to make sure your lenses are still suitable for your vision.
Advice
- Always store your lenses in a protective case to prevent scratches and prolong the life of the frames.
- Protect the lenses from scratches by holding the lenses with a soft cloth during repair.
- If you don’t know how to adjust, you should take your glasses to an optician. An optometrist will help you with adjustments for a very low or no cost.
- Eyeglass repair kits are available at eyeglass stores. Including all the necessary tools to adjust eyeglasses.
Warning
- Be gentle when bending the glass. Too much force can break the frame or break the lens.
- Be careful when adjusting multifocal lenses. Small adjustments can make a big difference to the function of these lenses. If you are unsure, you should ask an optometrist to make corrections.
Things you need
- Mirror
- Small flat head screwdriver
- Pointed pliers
- Soft and clean cloth
This article was co-written by Shaune Wallace, OD. Dr. Wallace is an ophthalmologist in Nevada. He received his OD from the College of Optometry of Southern California in 2006 and is a member of the American Optometric Association.
This article has been viewed 6,242 times.
After a period of use, the frame becomes easy to slip, tighten on the nose, hurt the ears or simply warp. You can take your glasses to an eyewear store to have them adjusted, or you can adjust them yourself by following the steps below.
Thank you for reading this post How to Adjust Eyeglasses at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: