You are viewing the article How to Fix a Scratched CD at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 19,396 times.
Scratches on CDs are a lot of trouble – your beloved CD has lost its best songs, or you’re dealing with an important document or program that’s in danger of being lost. You can find a lot of suggestions on the internet on how to deal with the problem, but we have found the 3 most effective and gathered them here. You can simply polish the CD with a bit of toothpaste, if that doesn’t work, try an abrasive compound or wax the surface of the disc.
Steps
Use toothpaste
- Regular toothpaste is cheaper than flashy advertised products. This is especially useful if you have a lot of CDs to polish. [1] X Research Source
- After washing and drying the CD, use a soft cloth to polish the surface of the disc.
Polishing with abrasive compounds
- If using Brasso, be sure to work in a well-ventilated area and avoid inhaling the fumes. Be sure to read the safety instructions and warnings on chemical products, as many (such as rubbing alcohol) are flammable and/or cause skin, eye, or respiratory irritation. [2] X Research Source
- When polishing a CD, be sure to place the disc on a flat and stable surface that is not rough. Data stored on aluminum foil or the colored layers on the CD surface (labeled side) and the protective top layer can be easily scratched. You may break or peel the disc if you press the CD against a surface that is too soft.
- Scrubbing in a circular motion (as opposed to moving from the center of the disc straight out) can cause small scratches on the CD, deflecting the player’s lasers.
- If the disc still doesn’t work, you need to take it to a professional at a game store or CD repair shop.
Apply wax
Adhesive tape method
Before handling, you should understand the fact that punctures in the aluminum plate of the disc cannot be repaired, even if you take it to a professional service. The best way to get through is to jump over these locations so that you can at least read and back up the rest of the data somewhere.
- Note: The CD may sound while playing, but at least you should be able to read 70% of the data on it.
Advice
- To avoid damage to the CD, you must remember to always hold it by the side of the disc.
- Severely damaged CDs may not be salvageable. Scratches and cracks that are too deep to reach the aluminum layer of the disc will render the disc useless. In fact, the Disc Eraser tool uses a way to damage the aluminum layer to make CDs and DVDs unreadable!
- It doesn’t matter much to practice repairing scratched CDs before you start repairing the discs you love.
- Try “Mr. Clean Magic Eraser” dry eraser pad to remove scratches. Apply light pressure and rub from the center of the disc to the edge of the disc like other polishing operations as described above. You can then polish the repaired area to shine using other methods such as polishing or waxing.
- It is better to back up your data before damage occurs.
- If the CD can’t be repaired, use it as a coaster! Read articles on how to reuse old CDs to discover good ideas.
- Usually you can take your Xbox discs straight to Microsoft for a new disc for about $20. [6] X Research Sources
- Instead of toothpaste, try peanut butter. The greasy stickiness of peanut butter makes it an effective polishing compound. Be sure to choose the very smooth one!
- When using toothpaste, be sure to use one that does not contain particles or minerals – just plain white toothpaste.
- You can use a dedicated iPad or iPhone wipe instead of a lens wipe.
Warning
- To prevent damage to the CD, you need to make sure it is completely dry and free of excess polish before attempting to play the disc.
- Do not apply solvent to the surface of the CD, as it will change the chemical composition of the ppycarbonate layer, making the disc surface opaque and unreadable!
- Note that any repair method may cause further damage. Remember to follow the steps carefully.
- If you hold the CD to strong light to check for damage on the aluminum, do not look at the light for too long. A 60-100 W bulb is enough for you to see the dents in the aluminum. Do not expose the plate to the sun!
Things you need
- Clean, soft and lint-free fabric (microfibre is ideal)
- Water (or rubbing alcohol)
- Brasso metal polish, fine polishing compound or toothpaste
- Liquid Car Polish or Vaseline Cream
- Cotton gloves or nylon food processing gloves (for easier handling of the CD and no fingerprints)
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 19,396 times.
Scratches on CDs are a lot of trouble – your beloved CD has lost its best songs, or you’re dealing with an important document or program that’s in danger of being lost. You can find a lot of suggestions on the internet on how to deal with the problem, but we have found the 3 most effective and gathered them here. You can simply polish the CD with a bit of toothpaste, if that doesn’t work, try an abrasive compound or wax the surface of the disc.
Thank you for reading this post How to Fix a Scratched CD at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: