You are viewing the article How to Clean iPhone Speakers at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 12 references cited in this article that you can view at the bottom of the page.
This article has been viewed 6,273 times.
There are three main ways to clean iPhone speakers. You can use a soft-bristled brush to clean the speaker, use a can of compressed air to blow away dirt from the nooks and crannies of the speaker, and finally, use tape to stick the remaining dirt around the speaker. If you have trouble playing sound through the speakers, you also need to clean the headphone port.
Steps
Try these simple cleaning methods
- You can dip the bristles of your toothbrush into rubbing alcohol to increase the effectiveness. Do not wet the entire brush head. [2] X Research Source
- Tear off a short piece of tape and roll it up into a cylinder, adhesive side facing out. The diameter of the cylinder should be equal to the width of your index finger.
- Insert your finger into the cylindrical duct of tape and press against the iPhone speaker.
- The tape will stick to all the dirt and debris that has accumulated in the speaker.
- Check the surface of the tape after each application. If you see lint and dirt on the surface, remove and discard the used tape, roll up a new piece of tape and repeat.
- Read the instructions on the spray bottle before use. We need to use the spray according to the instructions.
- Aim the air nozzle from the distance stated on the can.
- Gently squeeze the handle of the bottle and then release.
Clean the headphone jack
- Check if the speaker is working properly. [6] X Research Sources
- Cleaning the headphone jack with a cotton swab is the easiest and most common way to clean the headphone port.
- Do not immerse the tip of the cotton swab in water or rubbing alcohol. Damp cotton tips can damage iPhone.
- Oxygen spray is a popular tool used to clean computer components, which you can buy at your local computer or electronics store.
- If the above steps still do not fix the iPhone jack error, check to see if there is a foreign object stuck inside the headphone port. The jammed object should be carefully removed with a long, thin tool such as a paper clip or a straw.
See other ways to fix speakers
- If you can hear the sound after adjusting the Ringer And Alerts slider, check the Ring/Silent switch on the side of the phone. If the switch is in a position that shows a small orange dot, the device is in silent mode. You need to flip the switch in the opposite direction to activate the ringer mode.
- Check the sound after the phone has restarted.
- If during the update process, your phone asks you to temporarily delete some apps, just tap Continue. Then the apps will be reinstalled.
- You may be asked to enter a password. Enter your phone passcode when prompted.
- Before proceeding with the update, you should create a backup of your phone by connecting to a Wi-Fi network, going to Settings, and selecting iCloud. Then, tap Backup and swipe the iCloud Backup switch to the On position if it’s not already on. Finally, you click Back Up Now (Back up now).
- To check if the update is complete, go to Settings > iCloud > Storage > Manage Storage and select your phone. The backup file, size and creation time will be displayed here. [12] X Research Source
- Next, select “Repairs and Physical Damage” and click the “Unable to hear through receiver or speakers” option.
- On the next screen, click “Built-in speaker”.
- At this step, you have many options including chatting, scheduling a call and sending the device in for repair. Choose the action that suits you best.
- To restore your iPhone, you need to connect it to your computer using the cable that came with it. Then proceed to open iTunes on the computer.
- Enter the passcode or click Trust This Computer when the option appears.
- Click the phone icon that appears on iTunes. In the Summary tab, click Restore [device]. Click again to confirm the choice.
- Before starting the restore process, you should create a backup of your data following the same process as before updating iOS.
Things you need
- Soft bristle brush
- Cleaning alcohol
- Cotton swab
- Artist’s Tape
- Compressed air spray
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 12 references cited in this article that you can view at the bottom of the page.
This article has been viewed 6,273 times.
There are three main ways to clean iPhone speakers. You can use a soft-bristled brush to clean the speaker, use a can of compressed air to blow away dirt from the nooks and crannies of the speaker, and finally, use tape to stick the remaining dirt around the speaker. If you have trouble playing sound through the speakers, you also need to clean the headphone port.
Thank you for reading this post How to Clean iPhone Speakers at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: