What is a wheel? Structure and how to check the wheel

Wheels are an important part of a bicycle. Therefore, users need to choose for themselves a pair of wheels that are suitable for each use. Let’s learn about the structure and how to check bicycle wheels with Tnhelearning.edu.vn through this article!

The concept of the wheel

A wheel is a round block of hard and durable material, at the center of which is cut a hole through which a bearing is placed, which rotates when a moment of force or torque is applied to the wheel at about its axis. .

The main parts of the wheel

Consists of 3 main parts:

– Rims: also known as braces, the part with the longest service life in bicycles. However, it is necessary to find out carefully before buying or else we can still buy fake rims, which will rust after only a few weeks of use. This will cause danger to the driver when moving through potholes or in a light collision that is also prone to bending or oval.

Trunk: Is one of the most important parts of the car. It is responsible for slowing down or stopping the vehicle in case of ensuring the safety of the driver to avoid accidents caused by collisions with other vehicles or obstacles.

– Cam: also known as spokes, is the connecting part between the rim and the axle that makes the rim sturdy when under load.

In addition to the three main parts mentioned above, to make the car move smoothly, there is another part that is the tires. Tires are different depending on the type of vehicle. If you like to explore terrain or rough roads, a thick, spiked tire will limit skidding. And the thin tire will help you optimize your speed and lose more strength during the move, which is suitable for daily travel.

How to check wheels for safety

Safety is always the first priority so check your wheels carefully before using:

– The first is to check the spokes by squeezing both spokes together to see if they are loose or not, if so, tighten it.

– Too thin rims can also lead to chipping or warping of the wheel rims. You should regularly check and replace the rims if there are signs – above.

– When the wheel vibrates, shakes, that’s when you need to check and tighten the screws at the hubs (hubs).

– The biggest disadvantage of the drum brake is its poor heat dissipation due to its sealed design, which easily generates heat during operation. For this reason, the braking performance of the vehicle is worse, especially when braking is required or going downhill. Some cases you can consider to change the brake such as brake not working, brake squealing, heavy brake, brake lock, …

Above is an article to share with you information about bicycle wheel parts. Hope the information that Tnhelearning.edu.vn brings will help you in choosing the right bike for you!