What is a toilet bowl? How many types of floats are there today: Pros and cons?

Correctly adjusting the toilet float helps you to save water effectively, avoiding overflow and wasting water. Join Tnhelearning.edu.vn to learn how to adjust the toilet float to save water for the family through the article below!

What is a toilet bowl?

The toilet float is an important part of the toilet tank . The device works to ensure that the amount of water pumped up does not overflow into the pipe or air valve. Besides, the toilet float also helps push the water down faster, providing enough water for the toilet.

Signs that the toilet float is having problems

Here are a few signs that will help you identify a toilet float that has a problem and needs repair:

• Toilet flushing water is not at the required level: The toilet flush level is abnormal, less than or more than necessary, causing unsanitary.
• Continuous water leakage: Water in the toilet is not controlled, constantly leaking out causing water waste.
• Broken toilet float: When the toilet float has been used for too long, it leads to decay or damage, causing the toilet to flush weakly.

How to adjust the current types of toilet floats

Before proceeding with the correction, you need to carefully check what type of toilet float your home is to make it easy to handle!

Brass piston water tank

Brass piston water floats were invented a long time ago and are only found in toilets manufactured in the late 20th century.

This is an old style toilet, which does not save water , so it is rarely used later. Floats are quite bulky and prone to rust over time.

The way to adjust this type of toilet float is that you bend the arm so that the air bubble is at a reasonable level with the amount of water you need to flush after each use.

Plastic piston toilet water float

Plastic piston water floats are the most commonly used floats today . It has a screw so you can adjust the amount of water through the swing arm of the float.

You can completely manually adjust the amount of water needed in the toilet flushing tank each time you use it to go to the toilet.

To adjust the float, you just need to turn it clockwise to reduce the amount of water, counterclockwise to increase the amount of water.

Floating toilet water float

Floating toilet water floats are mainly used in smart toilets . Adjusting the float of these types of toilets is also quite easy. However, it is not preferred to use much because it is easily damaged.

You can screw directly for tubs with external adjustment rods. The types are specified in the valve, then remove the pin inside the valve and turn it clockwise to adjust the water level accordingly.

Floating toilet with water pressure sensor

The pressure-sensitive toilet seat is the most modern on the market. The product uses membrane pressure sensing and does not involve any piston or floating mechanism in the toilet. The increase or decrease in pressure will directly affect the amount of water in the toilet.

At the top of the water valve there is a screw that allows you to adjust the amount of water in and out. To raise the water level in the tank, turn the adjusting screw clockwise, and vice versa if you want to decrease the water level.

Benefits of adjusting the toilet float

Adjusting the toilet float will help you:

• Save a certain amount of water and water bills every month.
• Limit discomfort caused by loud flushing sound.
• Make sure the toilet is in good working order at all times.

Hopefully the article will help you know more about how to adjust the toilet float to save water. If you have a problem or have any questions, you can comment below for support!