Instructions for choosing to buy and install a pressure pump for a washing machine

The booster pump helps to create a stronger water pressure than the normal water flow rate, so it is used to support the operation of many devices, especially washing machines. To choose to buy a booster pump for a washing machine, please refer to the following article!

What is a booster pump?

Booster pump is a device that helps increase water pressure when going through a pipe, so that the water flowing out the faucet will be stronger and more powerful than the normal water force. At the same time, the booster pump is also integrated with an automatic function to help users use it conveniently and save water.

When you open any faucet, the booster pump will automatically open and generate great water pressure. When you turn off the faucet, the machine will also close automatically.

When to use booster pump for washing machine?

Weak water source is the main cause of washing machine inefficient operation. Therefore, the installation of a booster pump for the washing machine is necessary. There are also some other cases as follows:

The position of the washing machine is equal to the position of the water tank

Due to the limited space of the house, some families have placed the washing machine and the water tank equally on the terrace or placed the washing machine on the same level as the water tank. Therefore, this causes low water pressure , not enough water to supply to the washing machine.

Please check the position of the washing machine relative to the water tank to see if there is such a situation. If so, change the position of the washing machine lower than the water tank or use a booster to increase the water pressure.

The location of the washing machine is located where the water source is not stable

The area where you live has a weak, unstable water source , strong and weak at times, the best way is to install a booster pump immediately. You can not only use a booster for washing machines, but you can also use it with other water-demanding appliances to help the device work efficiently.

The cause of the washing machine’s water source is weak

The filter mesh appears dirty

The cause of the filter mesh appearing dirty may be because the water source has not been thoroughly filtered and the filter has not been cleaned for a long time. From there, the water flow into the washing machine is weaker.

To overcome the residue that appears in the filter, users only need to regularly clean the washing machine, especially cleaning the water supply and drain pipes. This helps to remove stains so that the water can be supplied stronger or drained faster.

The water tank is out of water

In addition to using domestic water directly, some households also use separate water tanks to prevent water outages. Maybe, your washing machine uses water from the tank, but the tank has run out of water, making the washing machine water weak.

Check the water tank to see if there is any water left. If not, pump water up to the tub to re-supply the washing machine. On the contrary, the water tank is still there but the water source is still weak, you should use the direct water source or attach a booster to the device.

Washing machine water supply valve is stuck

The cause of the washing machine water supply valve getting stuck is usually because the water source contains dirt . At the beginning of the operating cycle, the circuit board will issue a command to the water supply valve to open to allow water to flow into the washing machine drum.

If the water supply valve is stuck, the water supply to the machine will also be affected. Then, check the valve again and clean the valve. If the valve is badly damaged or too old, it is best to replace the valve with a new one for the washing machine.

The circuit board of the washing machine is faulty

The circuit board has the main function of controlling all activities of the washing machine. Therefore, the water supply to the washing machine is weak or cannot be supplied, possibly due to a faulty circuit board.

The washing machine is damaged by circuit board errors, it is best to ask for the help of professional technicians, do not repair it yourself to avoid more serious damage.

Things to keep in mind when choosing to buy a booster pump for a washing machine

Product booster pump for washing machine needs to meet some requirements as follows:

• Choose a machine with not too strong pumping force : You should choose a booster pump for a washing machine with a capacity of 60 – 125W is reasonable. If the pump is strong, it may damage the washing machine.
• Clearly define a number of parameters such as : Area and space to install the pump, distance and height between water tanks, volume of each tank, distance between washing machine and water tank. This will help you choose the right pump.
• Choose a machine with low noise : Machines with low noise and quiet operation will not affect the family’s activities.

In addition, on the market today, there are two types of booster pumps: electronic booster pumps (using relays and electronic circuits to control on/off) and mechanical booster pumps (using relays and pressure tanks) to pressurize the water).

If used for washing machines, you should choose an electronic booster pump because of its compact form, easy installation, moderate water pressure and low noise.

Instructions on how to install a booster pump for a washing machine

To install the booster pump for the washing machine properly and quickly, follow these steps:

• Step 1 : First, you need to determine the location of the booster pump. Please place the machine in a flat, safe place and near a water source to increase efficiency.
• Step 2 : Choose a water pipe with a diameter suitable for the diameter of the water hole. Next, you install the water pipe into the machine. Note that please install the ruble on the front end of the tube and place the tube in a safe position, in a straight line, avoiding bends.
• Step 3 : Finally, you check the pipe connection locations for water leaks or not. If so, you should replace the tube with a new one or wrap the tape to fix it.

With the above information, hopefully you will know how to choose and install the right washing machine pressure pump. If you have any questions about the pressure pump, please leave a comment below!