You are viewing the article 3 ways to make simple Halloween paper pumpkins at Tnhelearning.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Pumpkin is one of the indispensable decorations on Halloween. The following article of Tnhelearning.edu.vn will show you how to make a very simple paper pumpkin. Let’s find out now!
How to make Halloween pumpkin lanterns with paper and spring wire
Prepare
- Orange, green, black a4 paperboard
- Drag
- Springs
- 2-sided adhesive tape
Steps to take
Step 1 Take 1 sheet of orange paper and cut it into spokes with a width of about 2cm, the length equal to the length of A4 sheet.
Then, you use double-sided tape to stick to the 2 ends of the paper spokes.
Step 2 Stack the spokes on top of each other and spread them out into an even circle. Use adhesive tape to fix the paper spokes.
Step 3 Cut a small circle and glue it to the top of 1 spoke. In turn, peel off the double-sided tape at the top of the paper spokes and paste them evenly on the bottom of the small circle in order from right to left to create a pumpkin-like shape.
Step 4 Use the green paper to cut into the shape of a leaf and stick it on top of the paper pumpkin.
Step 5 Cut a green paper spoke with a width of about 1cm, the length equal to the length of A4 sheet, then roll the spokes into a circle, then remove and adjust to a spring shape.
Glue the paper spring to the edge of the leaf to form the stem for the pumpkin.
Step 6 Use 1 piece of black paper to cut out the eyes, nose and mouth for the pumpkin, then stick it in the right place on the pumpkin and you’re done.
How to make Halloween pumpkin lanterns with paper and glue
Prepare
- 2 sheets of orange cardstock (A4 size)
- Black brush
- Drag
- Glue
- Pencil and ruler
Steps to take
Step 1 Use 1 sheet of orange cardboard cut into 1 spokes with a width of 2cm, length equal to the length of A4 sheet. This paper will be used to make the handle for the lantern.
Step 2 Take another orange cardstock, lay it horizontally and use a black marker to draw a face in the center of the paper. The inside of the eyes, mouth, and nose are all painted black.
Step 3 When the brush drawing is completely dry, fold the paper in half so that the drawing is on the inside.
Next, draw a horizontal line 2cm from the crease. This horizontal line will make the edge of the compartment, helping you cut more evenly.
Step 4 Starting from the folded side of the paper, you cut a straight line 2cm from the short side, cut it up to the drawn horizontal line, then stop.
Continue to cut more straight lines 2cm apart until the end.
Step 5 Open the paper, you will see some vertical grooves in the middle. Then, fold the paper in the opposite direction of the original folding so that the drawing is on the outside.
Step 6 Use glue to glue 2 sides of the paper together to create a tube shape. Shape the paper tube into a lantern shape and then pin or glue the top and bottom of the overlap and you’re done.
Step 7 Finally, you glue the two ends of the paper strip from step 1 to the inside of the top edge of the lantern to form the handle. So the Halloween pumpkin lantern with paper and glue is done!
How to make Halloween pumpkins with paper and gold ribbon
Prepare
- Orange, black, white, green A4 paperboard
- Gold Ribbon
- glue
- Drag
Steps to take
Step 1 Take 1 piece of orange cardboard, fold it in half and use scissors to cut it into the basic shape of a pumpkin.
Step 2 Take 1 sheet of white cardboard cut into rectangles and circles to make teeth and eyes for the pumpkin. The size of the teeth and eyes is arbitrary.
Step 3 Take black cardboard and cut it into a mouth shape and two small circles to make the pupils of the eyes.
Step 4 Cut the blue cardboard into a pumpkin stalk shape. The length of the stalk is arbitrary.
Step 5 Use glue to fix the cut parts in place.
Depending on your creativity and humor to make a face shape for a pumpkin. Pumpkins can be ferocious or lovable depending on your dexterity.
Then, don’t forget to stick the green stalk on the top of the pumpkin.
Step 6 Make a small round hole on the pumpkin stem and then use the yellow ribbon to fix it to the stem. Now you can stick the pumpkin where you want it.
Some beautiful and unique paper Halloween pumpkin patterns
See more how to carve and decorate a beautiful and simple Halloween pumpkin
With just a few simple steps, you have a lovely paper pumpkin to decorate for Halloween! It’s easy to do, isn’t it? Try it now and share the results with Tnhelearning.edu.vn!
Buy quality candy at Tnhelearning.edu.vn for Halloween:
Tnhelearning.edu.vn
Thank you for reading this post 3 ways to make simple Halloween paper pumpkins at Tnhelearning.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: